Thứ Tư, 1 tháng 2, 2012

Odin: How to Upgrade Samsung Galaxy 551 I5510 to Android 2.3.6 Gingerbread Firmware I5510XWKPH

Here's the detailed guide on  how to update and upgrade your Samsung Galaxy 551 I5510 to latest Android 2.3.6 Gingerbread firmware this year 2012. Yes! this device got a new firmware update and it's still alive!
The newest firmware build is I5510XWKPH newer than previous build I5510XWKPA, I5510POKP8 and I5510XWKPG. This firmware is was spotted on Kies to be officially released in Hungary and Czech Republic.

Note: This firmware is only  compatible and flashable with Europe and Asia version of  Galaxy 551 GT-I5510.  Other versions like Galaxy 551 GT-I5510M and GT-I5510L in North and South America cannot use this ROM for it has a different Baseband Radio build. So don't ever try attempting to install this other than GT-I5510 instead find any custom ROMs that supports for your devices for there is no Gingerbread firmware updates so far in these areas.

Disclaimer: Droidangel shall not be held responsible if anything happens to your device by following this guide.You at your own risk. Flashing firmwares is for advance users only. This is a bit risky for beginners.
How to install I5510XWKPH stock ROM on Samsung Galaxy 551 GT-I5510 and upgrade it to Android 2.3.6 Gingerbread.

Before you proceed always back-up all important data stored from the device. We are flashing firmware here, so it is better to be prepared better than sorry if something went wrong.
Ensure that the battery is fully charge, I fully recommend fully charge batteries, I already encountered a weak battery that shows 80% power but it suddenly shut downs, for it is already weak.  So, make sure that your battery is completely 100% working. Power failure while flashing will brick your device in no time.
Use a PC/laptop runs in windows OS, make sure that the USB port is working.

Grab these files you'll need for flashing
Odin 4.42: Mirror1  Mirror2 (this version flash smoothly for it has an enhance mode support)
CALLISTO_v1.0.ops : Mirror1  Mirror2 (This is the default OPS file for Galaxy I5510 that tells Odin you are going to flash the right device.
Driver :  Mirror1   Mirror2 (only needed if you haven't installed Kies on your PC)

Stock ROMs ( I used the Czech firmware in this guide)
firmware info:
Phone: I5510XWKP1
Stock ROM Download:GT-I5510_VDH_I5510XWKPH_I5510VDHKP3

Czech Republic
firmware info:
Phone: I5510XWKP1
Stock ROM Download: GT-I5510_XEZ_I5510XWKPH_I5510XEZKP2
links via pulled from Samsung Kies server.
Password -

1. Extract the file after download.
2. Run Odin
3. Click on the OPS button then select and load the CALLISTO_v1.0.ops

4. Tick on 'One Package' checkbox, then tick on the 'One Package' button on the bottom of Odin.
Now find the extracted I5510XWKPH_I5510XEZKP2_I5510XWKP1_HOME.tar.md5 and load it.
Wait a couple of seconds for it will checking out the md5 checksum for possible errors or incorrect.

Upgrading samsung Galaxy 551 I5510 to Android 2.3.6 Gingerbread I5510XWKPH step 1

5. Set the Galaxy 551 into "Download Mode" turn it OFF, then Press and hold the 'Q key and Power key" simultaneously. You will then  see a downloading screen.
6. Connect the phone to PC, the ID:COM in Odin will turn to yellow if the device is already detected.
see the picture below. If Odin then recognize the phone, hit the "START"  button to begin flashing.
DO NOT  TOUCH or INTERRUPT the phone while the flashing is in progress. Wait until it completely finishes.
Odin Guide Upgrading samsung Galaxy 551 I5510 to Android 2.3.6 Gingerbread I5510XWKPH step 2

8. You will then see a word 'PASS" once its successfully finishes installing the firmware. The device will then reboot. Then unplug it from PC/laptop.
Upgrading samsung Galaxy 551 I5510 to Android 2.3.6 Gingerbread I5510XWKPH last step

Do full factory reset, this is useful if you'll experience bootloops after flashing. Master reset by code *2767*3855# or via recovery mode pressing the "T key and Power key" will get you in recovery mode just scroll down to Wipe Data/Factory reset.
Samsung Galaxy 551 I5510 Recovery mode

How to change to another CSC settings. This guide is originally created by skilledchaos, you can also visit his blog at to learn more on how to tweak your Galaxy 551 like rooting installing CWM and other stuff.

1. Flash the file GT-I5510_CSC-xxxxxx.tar.md5 via Odin 4.xx
2. You may want to control the result of your flash by calling *#1234# and looking at line 3
3. Call *#06# to find out your device's IMEI and note it
4. Call *#272*IMEI# (instead of IMEI type the result of step 3)
5. Select your favourite language / area, e.g.:

CPW => English ~ UK (CPW) => QWERTY (with GBP pressing Alt+F)
DBT => German ~ Germany => QWERTZ (with EUR pressing Alt+F)
ITV => Italian ~ Italy => QWERTY (with GBP pressing Alt+F)
XEF => French ~ France => AZERTY (with EUR pressing Alt+F)
XEO => Polish ~ Poland => QWERTY (with GBP pressing Alt+F)
XEU => Engish ~ UK (Open) => QWERTY (with GBP pressing Alt+F)

NOTE: If you change the CSC settings, your device will be resetted! Therefore backup your personal data! Your microSD card's content will not be harmed.

6. Don't forget to control the language settings for Swype
7. You may delete all folders of languages you aren't interested in from the system partition (go to /system/csc) to free up valuable space
8. You may also delete T9 support for all languages you aren't interested in from the system partition (go to /system/T9DB) to free up valuable space

7 nhận xét:

  1. what is the GT-I5510_VDH_I5510XWKPH_I5510VDHKP3.rar password?? thank you for answer

    Trả lờiXóa
  2. Thank You so much........finally some how....thnx......

    Trả lờiXóa
  3. You know guys you can just go to Samsung Support
    download KIES and update the firmware automatically

    Just did it, easy and fast :D

    Trả lờiXóa
  4. Odin has PASS complete then reboot phone but device disconnected. Just GT I5510 screen appear

    Trả lờiXóa
  5. hi..Im college student, thanks for sharing :)

    Trả lờiXóa
  6. 2016 and this tutorial still working.. thanks

    Trả lờiXóa