Thứ Bảy, 31 tháng 12, 2011

[ROM] IpmartX for Thunderbolt






I created this rom for the thunderbolt exclusively for ipmart users, this is the way I run my rom so wanted to share here for those few people who have the tbolt device, again for thunderbolt users only!! I added red overscroll and effects to give it a good i-Pmart feel and look!

2.11.605.9
Root - SU - Busybox - Deodexed for theme makers - Zipaligned
Browser mod from xda - 16 tabs
Misc tweeks
4 in 1 Reboot
Roboto Font
Removed all ringtones, notifications and alarms
Build.prop edits
Removed all skins
Red OverScroll effects
New bootanimation
All bloat and security issues removed
Flying window mod
Remove Locations icon from top bar
Misc power and speed tweeks
Battery icon from theme kitchen - Gauge style battery
Misc image tweaks


Thứ Sáu, 30 tháng 12, 2011

S5830DXKT5 Asia Samsung Galaxy Ace Android 2.3.6 Gingerbread firmware update release, Stock ROM online

The Android 2.3.6 Gingerbread firmware update for 'Singtel' Singapore version of  Samsung Galaxy Ace is now recently online over Samsung Kies server. The build number is S5830DXKT5  with a build date of December 20, 2011. This is the firmware update from previous version S5830DXKPD which is Android 2.3.4 Gingerbread. This must be also available for all South East Asian countries like, Indonesia, Thailand, Malaysia, Vietnam and Philippines sooner.



Model: Samsung Galaxy Ace GT-S5830
Provider/Country: SINGTEL - Singapore
Product Code: GT-S5830OKAXSO
Latest firmware: S5830DXKT5/S5830OLBKT3/S5830DXKT4/S5830DXKT5
Mirror:  http://www.multiupload.com/FWDOZKF6EU
Modified: 12/20/2011
Version: Android 2.3.6 Gingerbread

As for now the Android 2.3.6 has been already been first spotted rolled out across Nordic Countries S5830XWKT7, other European regions no sign so far.

Here's the detailed guide on how to manually upgrade your Galaxy Ace to Android 2.3.6 using Odin downloader and the S5830DXKT5  stock ROM.
samsung galaxy Ace odin flash stock ROM
Grab the S5830DXKT5 firmware update in Odin Flashable Stock ROM at sammobile.
Check out the list of available Stock ROM for Samsung Galaxy Ace here.

ODIN Flashing: How to Install S5830DXKT5 and Upgrade Asia version of Samsung Galaxy Ace to Android 2.3.6 Gingerbread

Here's the step by step guide on how to manually upgrade or update the Samsung Galaxy Ace S5830 -Asian version by flashing the stock ROM build number S5830DXKT5 if you prepare by using Odin flasher tool instead via online in Samsung Kies server. This will upgrade your device to Android 2.3.6 Gingerbread the most latest firmware update this year. This is an update from the previous version with build number Android 2.3.4 S5830DXKPD. So check out your device firmware info by typing *#1234# to know what Android version your Galaxy Ace runs.

This for Asia version of Samsung Galaxy Ace specifically for Singtel network provider in Singapore users but can also be used by nearby South East Asian countries for it has the same firmware build, the only disadvantage is that, you'll get the Singtel's default CSC file and you will get some issues updating on Kies in your areas. For European version, you can try to upgrade to Android 2.3.6 by using the Nordic countries firmware S5830XWKT7 and or the Russian S5830XXKPP which is both an Android 2.3.6 also.
Do not use the stock Asian stock ROM, unless you are in Asia region for it got the Asian support languages and applications.

Disclaimer: Droidangel shall not held responsible if anything happens to your device by following this procedure. Proceed at your own risk. This is not advisable for beginners, for advance users and experts alike use only.

This is a manual method, so you need to grab the official build firmware update S5830DXKT5 in Odin flashable stock ROM and then the Odin multi-downloader program.
Grab it here at sammobile firmware page.
Stock ROM: S5830DXKT5_S5830OLBKT3_XSO
Password: samfirmware.com (if the password don't work it means your download is corrupted, it already proven and works for us)
ODIN: Odin_Multi_Downloader_v4.38.rar
You'll also need the OPS file for it has not included in the package.
OPS: Cooper_v1.0.ops
Once you download the file, extract it then you'll get the S5830DXKT5_S5830OLBKT3_S5830DXKT4_HOME.tar.md5 file.
There is also another file labeled 'SS_DL.dll' - which is not going to use on this process. 

Important: Do the following before proceeding;
- Back up all the important files stored from the device. (Although we are flashing a single file here, it means that no wipe will take effect but its better to be prepare if something went wrong.
- Ensure that the battery is at-least 50% charge, much better if it's fully charge. (This will prevent your device from bricking due to power failure)
- Use a good conditioned and a working USB cable for your Galaxy Ace.
- Your PC or laptop must run on windows OS with a good USB serial port connection.
Sometimes flashing fails because of bad PC/laptop USB serial ports.

1) Now, run Odin on your desktop.
2) On ODIN click the OPS button and load the Cooper_v1.0.ops file on it.
3)  Hit the One packaged in the checkboxes options (the Auto reboot and protect OPS remains to be checked, then at the lower part of Odin click on the One Packaged button then select and load the
S5830DXKT5_S5830OLBKT3_S5830DXKT4_HOME.tar.md5

samsung galaxy Ace odin flash stock ROM

4) Set the Samsung Galaxy Ace in Download Mode:
Turn the OFF the phone or remove the battery for a couple of seconds then put it back again. By pressing Volume Down+Power+ Middle keys simultaneously. The phone will then reboot into download mode.
samsung galaxy Ace Download mode
5) If the device is already displays the download mode, connect the phone to PC, on ODIN window the COM Port mapping turn to color yellow and indicates that the device is already 'added' - means connected.
6) Once the connection set up is okay, begin the flashing by hitting the 'Start' button.

It only takes around 4 to 5 minutes to complete, a progress bar on the left side of ODIN will show you the downloading progress. A word "PASS" will display once it finishes.
It's time to unplug the phone from PC, then do a factory data reset to clean all data caches and have a fresh firmware installed, you can do this by Recovery Mode button - Home + Power Button, then toggle on using the volume button and select Wipe Data/ Factory Reset or by typing this code *2767*3855#.
To check the newly installed firmware update - by typing *#1234#.
You might also need to re-confingure you APN settings again if having wifi or internet connection issues.

S5660DXKT4 Asia firmware update for Samsung Galaxy Gio Android 2.3.6 Gingerbread

Asia version of Samsung Galaxy Gio GT-S5660 is getting the Android 2.3.6 Gingerbread firmware update with build number S5660DXKT4. This is an update from previous build Android 2.3.4 S5560DXKP6. The build date is December 2011 and more likely hitting on all South East Asian countries like Singapore, Indonesia, Thailand, Malaysia, Vietnam and Philippines.
China, Hong Kong and Taiwan yet still on Android 2.3.4 so far with build number S5660ZCKP6 and S5660ZSKPB and no sign of 2.3.5 or 2.3.6 update yet. But this version is applicable to all Asian countries.
Samsung galaxy Gio original stock ROM

firmware info:
PDA: S5660DXKT4
CSC: S5660OLBKT4
PHONE: S5660DXKT4
Version: Android 2.3.6 Gingerbread
Build/Released: December 2011 
Country: Asia 
Grab the stock ROM  at Sammobile if you prepare using Odin tool.
GT-S5660 S5660DXKT4_S5660OLBKT4
Mirror: http://www.multiupload.com/2ZIEWE127S
 This comes in a single package around 116MB in size.

To flash or install it using Odin. 
This is a manual procedure to upgrade your galaxy Gio to Android 2.3.6 if you are having issues updating it via Samsung Kie server.
Grab Odin v4.42 and and the GIO_v1.0.ops then put the file on the single package in Odin space.
See our  flashing procedure here, that's how exactly  you can also upgrade your Galaxy Gio to Android 2.3.6 Gingerbread using the S5660DXKT4 stock ROM.

Thứ Tư, 28 tháng 12, 2011

ODIN Guide: How to Update/Upgrade Samsung Galaxy Tab Wifi P1010 to Android 2.3.6 Gingerbread XXKPG Firmware

Here's the step by step guide on how to manually upgrade your Samsung Galaxy Tab Wifi Only GT-P1010 to Android 2.3.6 Gingerbread build by way of using Odin multi-downloader tool and the Android 2.3.6 stock ROM P1010XXKPG with P1010XEUKPG CSC file. These procedures are way too little bit risky for beginners for it will run into a different stages in flashing and if you ever mess up, you are going to brick your device in no time which you find it enough hardly to recover.

As we know tweaking the Galaxy Tablets firmware is a little bit too risky compare to the typical Android Phones. So these procedure might will help you out to figure out on how to tweak your P1010 Wifi Tablet that only runs on 2.2.1 Froyo and if you want to dress it up into something perhaps a new look and a Gingerbread experience as well.

Disclaimer: Droidangel shall not be held responsible if something happens to your device for using these guides. Just proceed at your own risk.

Manual installation using P1010XXKPG stock ROM to upgrade Samsung Galaxy Tab Wifi Only GT-P1010 to Gingerbread.

- To make your flashing goes smoothly you firstly need to have your device installed with P1010 Clockwork MOD recovery on it.. Big thanks to Skin1980 for getting us out to worry about bricking our Galaxy P1010 Tablets again. Install that CWM to get rid of brick.
- Back up all of important files or data stored from your device. You can perform a nandroid back up after you mount the CWM on it.  
- Perform wiped data and cache from recovery. 
- Make sure that the battery is fully charge or at least above 50%.
- Use PC/laptop runs on Windows XP or later OS. 
- Install Kies on your PC to have the needed driver for your P1010 Tabs.
- A supplied USB cable for your Tab.

Grab the needed files:
Stock ROM P1010XXKPG_P1010XEUKPG
- The Pit File P1wifi_20110128_r10_00.pit
- Odin downloader tool Odin3 v1.85.

1. Extract the downloaded P1010XXKPG stock ROM
2. Run Odin on your PC desktop.
- Tick the PIT button and select the P1wifi_20110128_r10_00.pit  file
- Then the PDA button and load the P1010XXKPG_P1010XEUKPG_HOME.tar.md5
DO NOT CHECK THE RE-PARTITION checkbox. Only the Auto-Reboot and F.Reset Time got on it.

3. Prepare your Galaxy Tab P1010 into download mode and then connect to PC.
- Turn Off your tablet or Remove the battery for a while then put it back again. Press and hold the POWER and VOLUME Down buttons while the phone is OFF.
- Then connect the device to PC when it displays a triangle with an Android robot digging with a shovel and word says "Downloading - do not turn off  Target", Odin will indicate a word 'added' on the log screen and the ID:COM box will turn to yellow color.


4. Hit the 'Start' button to begin flashing. 
How to Update/Upgrade Samsung Galaxy Tab Wifi P1010 to Android 2.3.4 Gingerbread XXKPG Firmware

DO NOT TOUCH the tablet while flashing still in progress, let the flashing completely finishes. It only takes just around 4 to 5 minutes - depends of your PC speed. A word "PASS" will display in ODIN once it
successfully completes. And then after it reboots you will then have the Android 2.3.6 Gingerbread firmware upgrade on your Galaxy Tab P1010
Here's another detailed guide prepared by taney at XDA-developer.
if you are still struggling to get that Gingerbread upgrade on your P1010 WiFI Tablet.

Thứ Sáu, 23 tháng 12, 2011

HTC HD2 NAND Toolkit v4.2.0.1 – Toolkit for HD2



Please Do Not Modify/Rename/Delete Any Files From The Program Files Directory! Doing So Might Brick Your Device!!!
Hello XDA Users / HD2 Owners,
This is an All in One Toolkit for HTC HD2 NAND Users. The main purpose of this toolkit is to simplify many complex tools/guides which are difficult or unsafe to use. As we all know that HD2 has got a powerful hardware base, but the pre-packed Windows Mobile operating system just ruins all the fun of having a device with high specs. So, developers on XDA like codesmith and Cotulla have created alternative bootloaders which can load Android kernels so that we can use Google’s Android operating system on our devices. This tool will help you install those bootloaders, and also do many other customization/modding works easily from one control panel. Here are the main features of the Toolkit:
Simplifies Installation of cLK and MAGLDR (Android Bootloaders)
Simplifies Installing Roms, Radios, SPL’s and other things by letting you install NBH Files with one click
Makes it easier to Re-Partition your Android Phone
Makes it easier to install Reicvery
Automates process of flashing NBH Files
Well, those were just the main highlights of the tool. There are a lots of other numerous features that will let you easily do many complex stuff. After lots of nights without sleep and red eyes, i have finally made this small piece of software able to do most things that a normal HD2 NAND Android would want to do easily.
Current Version: 4.2.0.1
Current Recovery Version: 5.0.2.6
Last Update: 6/15/2011
Latest HighLights
Installer
Express Mode – Express Mode enables you to automatically do a lots of stuff automatically. Just check the Express Tools button and try to use the features mentioned on the msgbox
NBH File Handler – Easily install nbh files by just opening it like a normal file
About The Software
Hd2 Toolkit is the result of a lots of nights of work with help from recognized developers such as arif-ali, seadersn and others. I have tried my best to make the software as user friendly and powerful as possible. I really appreciate the fact that you guys are using and loving this little software i made. At first, i made a tool that was intended to make it easier to repartition MAGLDR bootloader. Then gradually you guys started using it and started suggesting more and more features which i implemented as soon as i could. Version after version, i started to add new new features you guys suggested and soon i changed the name to ClockworkMod Installer. After few versions of developement, and bug reporting from T-Macgnolia, i finally added support for cLK bootloader. Then after adding a lot more features you guys suggested, i changed the name again, and this time to a name that makes broader sense, HD2 Toolkit. I will keep on updating this tool as frequently as i can. I hope you guys will like this tool. Any suggestions, comments, questions, bug reports or anything related to this tool are welcome. Thanks to mods who made this post a sticky
General Info
1) MAGLDR Repartition – This option will completely erase all your files and data on your device and change the system partition size to the one you choose. Use this option if you get no memory left error or if you need to change partitions to use new rom.
2) MAGLDR Recovery Update – This will update your recovery from older version to newer version in MAGLDR without deleting any data or changing partitions. Use the first option if you get no memory left error. Your phone needs to be powered on, connected, usb debugging enabled and in android to use this option.
3) cLK Recovery Install – This will install/update your recovery from older version to newer version in cLK. Your phone needs to be powered on, connected, usb debugging enabled and in android to use this option.
4) cLK Repartition – This option allows you to re-partition your hd2 running clk bootloader easily like magldr.
5) Downgrade Recovery – This option allows you to downgrade recovery on your hd2 easily. This might be useful if you get an no memory available error while flashing.
MAGLDR Partitioning Instructions
1) Download the ZIP file.
2) Extract it somewhere.
3) Open Setup.exe
4) Choose the system partition size you want, or choose custom and enter custom size.
5) Press Repartition button.
6) Follow Instructions.
MAGLDR Upgrade Instructions
1) Download the ZIP.
2) Extract it somewhere.
4) Choose MAGLDR Recovery Update
5) Press Update
5) Follow Instructions.
cLK Partitioning Instructions
1) Download the ZIP file.
2) Extract it somewhere.
3) Open Setup.exe
4) Choose "cLK Reparititioin" and choose system partition size you want.
5) Press Repartition button.
6) Follow Instructions.
cLK Upgrade Instructions
1) Download the ZIP.
2) Extract it somewhere.
4) Choose cLK Recovery Update
5) Press Update
5) Follow Instructions.
Download (4.2.0.1)
http://www.multiupload.com/E3L7F8A0VY
bzdemes for continuing my work!
Koush for Clockworkmod
arif-ali and seadersn for compiling clockworkmod and also for lots of other stuff
T-Macgnolia for doing bug testing and reporting them (Big Thanks!!)
codesmith for cLK
Cotulla and DFT for MAGLDR
Everyone who suggested me features
Everyone else who has helped in developement of HD2

Odin Guide on How to Flash and Install stock ROM Firmware on Samsung Galaxy Y S5360

How to use Odin in flashing the stock ROM on Samsung Galaxy Y S5360?

Here's the procedure on how to manually install the stock ROM (firmware) on Samsung Galaxy Y GT-S5360. Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desired. This has been also useful for unbricking purposes for a bricked, reverting back to original stock or if you needed your device warranty back.

This guide is a bit risky for beginners and can only be used by advance users who already had a little bit experience on how to tweak android devices firmware.
Now, this procedure is no joke and should be taken seriously  for it might results to damage your phone if some mistakes might happen. We are talking about firmware flashing here, one false move or any interruption will take your device into serious situation that is not too easy to recover.Your phone is not a toy for us, but it is your personal property, you are the only one who can decide on what to do about it.


 Disclaimer: We shall not be held not responsible if anything happens to your device by following this guide. Proceed at your own risk!
Needed files and tools
Stock ROM - See list of Samsung Galaxy Y stock ROMs (extract it after downloading)
Odin Multi-downloader -
PIT file - Tottoro.pit (Only needed for full flashing)
Driver - You need to install Kies to get the driver of your phone.
USB cable - use the supplied USB cable of your Galaxy Y.
PC or laptop - running on Windows or later OS.
Your Phone - Samsung Galaxy Y GT-S5360

Preparation before Flashing
Back-up all of your important data stored in the phone like contacts, messages and etc. Flashing will wipe and delete all of it.
Ensure that your phone is fully charge or above 50% charge. (If your phone had an auto-shutdown history, and its too old, use a newer or good working battery.
Remove the SIM card and the external memory card. (not necessarily but recommended to avoid any certain issues)
Hard Reset - We often do hard reset before flashing to clean the memory cache of the phone. Master reset code *2767*3855# .

ODIN Flashing Procedures for Samsung S5360 Galaxy Y
1. Run the ODIN Downloader on your PC desktop.
2. Load the firmware binary files on each designated button spaces.

How to Flash with Multiples files with Pit, Bootloader, PDA, Phone and CSC
This is full flashing and useful for unbricking for it has a full packaged with individual file allocations, this type of files we often used to fix a bricked Samsung Android devices. Some firmware updates have like this one and some are came into just a single file packaged.

Click on each button and load the appropiate file unto it.
Pit Button - the tottoro.pit is the default repartition file for Samsung Galaxy Y S5360

Bootloader - look for the file with the letter Boot,
like DefaultCalDataWithBoot_S5360XXXXX_REV05.tar.md5

PDA button - look for the file with the letters PDA on it,
like PDA_S5360XXXXX_REV05.tar.md5

PHONE button- look with the word MODEM file,
like MODEM_S5360XXXXX_REV05.tar.md5

CSC button - associated also with letters CSC or Multi_CSC,
like GT-S5360-MULTI-CSC-OXXXXX.tar.md5

There are three checkboxes on the left side of ODIN, the Re-Partition, Auto Reboot and F.Reset Time.
The Auto Reboot and F.Reset Time are often always checked in flashing while the Re-Partition will only be checked if you want to fix the memory partition of the phone, now if you'll only want to upgrade or downgrade DO NOT CHECK THE REPARTITION.

Samsung Galaxy Y S5360 firmware update Odin flashing

How to Flash Without Bootloader and PIT file?
Flashing with pit and bootloader file is quite enough risky but a little more safer than without it.
It's the same as the above method just load the PDA, MODEM/phone and CSC file to each designated boxes. The "Repartition" checkbox is not to be check, only the Auto-Reboot and F,Reset Time got the checks



How to Flash with Only Single file?
Some files came only in a single packed like with tar.md5 file extension., and sometimes a 'SS_DL.dll' file also included on it. Others are confused where to put this file. Well, the S5360XXXXX_S5360XXXXX_S5360XXXXX_HOME.tar.md5 goes on to the PDA button section while the 'DLL' file in not to be used, it only be used on some other issues.
Again the "Repartition" check-box is not to be tick, only the Auto-Reboot and F.Reset Time are checked.

Samsung Galaxy Y S5360 Odin Flashing single file stock ROM firmware

Setting up the Samsung Galaxy Y into Download Mode and Connecting to PC.
You need to set the device into download mode in order to let Odin recognize it. To set into download mode
Turn OFF the phone, then hold and press the three buttons Volume Down + Home + Power Key simultaneously, you are then opted into download mode screen use the Volume Up button to proceed. If you'll still not get into download mode, remove the battery a couple of seconds then put it back again and then press the download mode button combination again.


Samsung Galaxy Y S5360 Download mode buttons
Once the phone displays the Android robot and says "Downloading..." Connect the phone to PC with the supplied USB cable. Odin will automatically recognize it if it's properly connected, the ID:COM mapping will highlight to color yellow and says "added" on the log box.

Start Flashing
Hit the "Start" Button when all are set perfectly to begin flashing.

Samsung Galaxy Y S5360 Odin Flashing
CAUTION: Avoid touching the phone while the flashing already started, any interruption will result into serious issues like soft-brick or hard-brick.

Let the flashing completes, a progress bar displays until the firmware downloading process finishes. It only takes around 3 to 5 minutes, depends of your PC speed.
When a word "PASS" appears, it means that the flashing is successful. The phone will then reboot and after completely rebooted it is now safe to remove it from computer's connection.

Samsung Galaxy Y S5360 Odin successful flashing
Do a hard reset again by the code *2767*3855#  or in recovery mode hold and press Volume UP+Home+Power key. Navigate to the Wipe Data cache/Factory Reset.
Some other tweaks:
1) To check your  recent firmware info *#1234#
2) CSC configuration - IMEI number check [*#06#]
3) *#272*[IMEInumber]#
4) Choose sales code

Thứ Tư, 21 tháng 12, 2011

T-Mobile Samsung Galaxy Tab 7.0 Plus Android 2.3.6 Gingerbread T869UVKL2 Firmware Update Released


The firmware update for T-Mobile's Samsung Galaxy Tab 7.0 Plus has been officially pushed out by Samsung  Over KIES and FOTA (over the air). This is for the tablet's performance improvements and enhancements and no other major changes or some added features on this update. The firmware build number is T869UVKL2 packed in Android 2.3.6 Gingerbread - an update from previous build T869UVKJD.


T-Mobile Samsung Galaxy Tab 7.0 Plus Android 2.3.6 Gingerbread T869UVKL2 stock ROM

For those who does not have an update yet and wants to upgrade now, just check it out on Kies or just wait for the automated over the air update through SMS message notification from T-Mobile.

Firmware info:
Baseband/Modem build number: T869UVKL2
Model: Samsung Galaxy Tab 7.0 Plus SGH-T689
Provider/Country: T-Mobile USA
Product Code: SGH-T869MABTMB
PDA: T869UVKL2
CSC: T869TMBKL2
Phone/Modem: T869UVKL2Version: Android 2.3.6 Gingerbread
Build/Release: December 13, 2011

Just visit this official support page of Samsung on how to update your Samsung Galaxy Tab 7.0 Plus SGH-T689 using Kies and or via FOTA (Firmware Over The Air). The T869UVKL2 stock ROM is also available for advance users, you can grab it here at sammobile firmware page. Stock ROM: SGH-T869_TMB_T869UVKL2_T869TMBKL2

Samsung Poseidon's ROM GB.XXKPQ for Samsung Galaxy GT I9003


This is the best custom ROM for GT I9003 I have used so far

POSEIDON'S ROM RC1 XXKPQ
All credits go to BlaqKarma
blaqkarma CREATOR OF POSEIDON'S ROM for SGSL i9003
I have included all the required files with required instructions.

SYSTEM MODS
-ROOTED
-BUSYBOX INSTALLED
-DEODEXED
-ZIPALLIGNED
-EXT4 CONVERT

THEME
-TW4 LAUNCHER
-MIXED THEME
-FLYIN TRANSITION
-1% BATTERY INCREMENTS
-EXTENDED POWER MENU
-CRT EFFECT
-14TOOGLE
-10LOCKSCREEN
-CUSTOM SOUNDS/RINGTONES/NOTIFICATIONS
-MULTI-LANGUAGE ANDROID KEYBOARD
-THEMED SWYPE
-WORKING EDT TWEAK
(now u can change your status bar color,hide status bar clock/battery, etc etc..)
(LOCKSCREEN OPTION DISABLED as you can change it on the DISPLAY OPTION)
-CUSTOMIZE YOUR BOOT ANIMATION

ADDED FEATURES
-ENHANCED RAM MANAGEMENT
-ENHANCED REBOOT TIME
-ENHANCED UI RESPONSE
-DECREASED BATTERY DRAIN
-CYANOGEN APN LIST
-GPS FIX
-TUN.KO FOR OPENVPN

UNIQUE FEATURES
-ENHANCED VIDEO AND PHOTO RECORDING QUALITY
-DECREASE DIALLING OUT DELAY
-INCREASED OVERALL TOUCH RESPONSE
-INCREASED 3G SIGNAL
-INCREASED INTERNET CONNECTION
-RENDER UI on GPU

ADDED TWEAKS
-LOOPY script by LPY
-V6 SUPERCHARGER by ZEPPELINROX
-ALLINONE script by FUSS132
SAY THANKS TO THEM ON THEIR ORIGINAL POST

ADDED APPS
-MIUI MUSIC PLAYER
-BOB CLOCK3D
-POLARIS OFFICE
-FASTER FIX
-DSP MANAGER
-ANTEK APP MANAGER

I have included all required instructions. Please open Readme folder first:nod:
Screenshots






Download Here

Thứ Ba, 20 tháng 12, 2011

Droid Razr 'SIM Card Error' Plus Camera BugFix Software Update Rolled Out

A little big relief for all Verizon wireless Droid Razr users who's suffering the sim card issues - received a red X in the notification bar saying: “SIM card authorization error” and “The SIM Card may not be authorized for LTE service. Please Power down the phone and contact Wireless Provider Customer Service.” Upon receiving this message they no longer are connected to Verizon’s 4G LTE network.

Motorola Droid RAZR fix Sim card error problem
Finally, Verizon tech support team after having heavy stormed by confused Droid Razr users already found out an answer to resolved the said SIM card error outage problem. The software update that fix this bug will be push out any time now.

The new software build is 6.11.747.XT912.Verizon.en.US

Feature List:

* SIM error notification has been fixed
* Improved camera features and quality
* Improved stability of menu access, browser, phone dialer, video playback and music player to prevent force-close errors and lockups
   
* Updated group message notification in e-mail
* Improvement in 3G/4G data connectivity
* Maintain network connection upon completion of a voiec call
* Background color has been adjusted to improve readability in Lapdock connection UI menu items.

Via Verizon Wireless Thanks to Android central

Thứ Hai, 19 tháng 12, 2011

S5830XWKT7 Samsung GalaxS5830XWKT7 Samsung Galaxy Ace Android 2.3.6 Nordic Countries Firmware Updatesy Ace Android 2.3.6 Nordic Countries Firmware Updates

The firmware build number S5830XWKT7 has just been spotted on Kies for Samsung Galaxy Ace GT-S5830. The indicated CSC file is 'NEE'  for Nordic Countries - Denmark, Finland, Iceland, Norway and Sweden. The pack is Android 2.3.6 Gingerbread, an update from the previous build S5830XWKC2.
Anyone from Northern Europe  can now check for updates through Samsung Kies Official firmware update server.

Firmware info:
Build: S5830XWKT7 - NEE
Model:  Samsung Galaxy Ace GT-S5830
Product Code: GT-S5830OKANEE
PDA: S5830XWKT7
Phone: S5830XWKT3
CSC: S5830OXFKT1
Version: Android 2.3.6 Gingerbread
Build/Modified: December 09,2011

The Stock ROM Odin flashable version has already been already pulled from Kies server,  advance users can now upgrade to Android 2.3.6 by flashing the said stock ROM using Odin downloader tool.

Download the S5830XWKT7 Stock ROM:
GT-S5830_NEE_S5830XWKT7_S5830XWKT3_S5830OXFKT1
 Password: sampro.pl
Credits to Przekret @XDA

Thứ Bảy, 17 tháng 12, 2011

How to Flash Samsung Galaxy TAB P1010 WIFI Firmware using ODIN

Here's a step by step procedure on how to flash the Samsung Galaxy TAB P1010 WIFI device.

Warning: This is not advisable to beginners who doesn't have any knowledge about firmware version. TABS firmware comes from different versions according to Country, Region and Carrier providers.  You will messed up your phone if you will flash it with a wrong firmware which is not comes or match to your device.
You are warned, proceed at your own risk! this is for advance users only. We are not liable any problems happens to your device.

Before you proceed prepare the necessary things to do as follows:
- Create a sync to backup all your personal data, like: Contacts, Messages, Applications, Pictures and Videos, because you will lose after the update.
- Make sure that the battery as its peak level to ensure stability and avoid failure issues.
-Close all softwares, such as KIES suite, Antivirus, firewalls, to prevent the possible conflicts;

-Prepare a personal computer or laptop with Windows XP, Windows Vista or Windows 7, and of course you must to deactivate the antivirus from your computer and you must to have administrator access, to be able to download and install the drivers ;

Prepare the tools you need in this process.:
 Samsung Galaxy Tab Downloader program


Samsung P1010 Galaxy Tab WIFI Original Firmwares
P1010XWKB5 - P1010XWKB6 - P1010XWKC1-OXX - P1010XWKB8
 Or Download the latest firmware updates

- Samsung Galaxy Tab WiFi P1010 USB cable;

Flashing the Samsung Galaxy TAB P1010 Firmware Procedures:

1. Extract and Run the ODIN Downloader tool.
Samsung galaxy S ODIN flashing 01

2. Check the AUTO REBOOT and RESET TIME checkbox.

Samsung galaxy S ODIN flashing 02
3. Select the PIT/PDA/CSC files in Odin
Insert the desired files on each field.
  1. Click PIT button and select: p1wifi_20110128_r10_00.pit
  2. Click PDA button and select: P1010xxxxx-REV03-ALL-low-CL946441.tar.md5
  3. Click CSC button and select: GT-P1010-MULTI-CSC-Oxxxxx.tar.md5
Samsung galaxy S ODIN flashing 03

4. Set the device into DOWNLOAD MODE
Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power at the same time.You will eventually see a picture like the one below with black Android robot digging within a  triangle.
Samsung galaxy S ODIN flashing 04

5. Connect the Device to PC using the DATA cable
Connect your phone with your computer and wait until the drivers are installed.
Make sure the ID:COM box highlighted yellow to know that the handset is connected to the PC properly.
If you still do not get any results, try another USB port on your computer.
Samsung galaxy S ODIN flashing 05

6. Enter the Device into Firmware Downloading process
 When the drivers are installed and all binary files needed is ready, Click Start Button. Finally you must to wait until the Samsung Galaxy Tab WiFi P1010 update process is complete (you will receive after 3-5 minutes a green Pass box)..
Samsung galaxy S ODIN flashing 06
The phone will be flashed and once it’s finished, it will boot up.Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!
But if you do not see a blue progress bar on your phone after 5 minute, take out your phones battery, unplug your phone and start from step 1 again.

7. Handset reboots when flash or download completes
Once you see the message "PASS", you have successfully flashed the phone.

Samsung galaxy S ODIN flashing 07
To check if you have successfully update your device enter the following code: *#1234#.
Also, you may know that you can clear your cache, simply using the following full reset code: *2767*3855#.

P1010XXKPG Samsung Galaxy Tab Wifi Only P1010 Android 2.3.3 Gingerbread Firmware Update [Stock ROM Europe]

Finally! the long awaited Android 2.3.3 Gingerbread firmware update for Samsung Galaxy Tab P1010 wifi only, will be push out officially sooner to all European version of the said Android Tablet. The firmware build P1010XXKPG that is packed in Android 2.3.3 Gingerbread is now spotted on Samsung Kies server and for advance users only so far. The firmware indicated that it has been builded or modified as of  2011 December 1st. The firmware or ROM got the CSC file XEU - P1010XEUKPG ( firmware letter code for  Europe - UK).
This gonna be a major update for the Galaxy Tab P1010 because it seems that it came while since this device runs on Android 2.2.1 Froyo from previous firmware build P1010XXKB9 and P1010XXKM1.


Firmware info:
Model: Samsung Galaxy Tab P1010 Wi-Fi Only
Product Code: P1010CWLXEU
Latest firmware: GT-P1010_XEU_P1010XXKPG_P1010XEUKPG
PDA: P1010XXKPG
Phone: P1010XXKPG
CSC: P1010XEUKPG
Build/Modified: December 1, 2011
Version: Android 2.3.3 Gingerbread
Official Release: Soon!
Region: Europe

We will just keep an eye over Asia, North and South America and other regions if the said Android 2.3.3 Gingerbread will be available sooner. For now, there is no trace of other regions if also gonna get the Gingerbread upgrade, but hopefully might will be getting an update as well also.

 Advance users can now grab the P1010XXKPG stock ROM to manually upgrade their Galaxy Tab P1010 to Android 2.3.3 using Odin downloader tool. Get it here at  sammobile.com.
Typical users can wait for a while, for this will be officially roll out later over the air.

Thứ Tư, 14 tháng 12, 2011

T989UVKL1 T-Mobile Samsung Galaxy S II Android 2.3.6 firmware update - stock ROM online!

An upgrade  from previous firmware build version T989UVKID for T-Mobile's Samsung Galaxy S II SGH-T989 will come sooner to be officially release. This new firmware update with build number T989UVKL1 which is now packed in Android 2.3.6 Gingerbread. We spotted it earlier over on Samsung Kies server as a "test mode" so far but definitely  it's going to be officially push out this coming few days.
This firmware has been modified as dated 10th of December 2011.

According to T-Mobile's News team that upgrading your Samsung Galaxy S II to T989VUVKL1 will benefit from:
  • Caller ID enhancements
  • Battery enhancements
  • Wi-Fi calling enhancements
Here's the freshest news  from T-Mobile support site.  
Good news everyone.  A software update has already been released to activate Wi-Fi calling on the HTC Amaze, and beginning today, a software update is coming out that will do the same for the Samsung Galaxy S II.  Both updates are being done as an over-the-air update, meaning that you will receive a message on your phone telling you that an update is available, once it is pushed to your device.

For the Amaze, you can manually update the software manually.  I have done this and I find that the Wi-Fi calling experience is actually better than it was with my MyTouch 4G.

Unfortunately, a manual update is not available for the Galaxy S II, so please be patient and you should receive your update soon.
Some advance users already managed to upgrade using the T989VUVKL1 stock ROM found out and confirmed that the wifi calling and battery stuck issues are indeed already fixed.
The T989VUVKL1 stock ROM that has been already pulled from kies is now available for grab at XDA-developer
SGH-T989_TMB_1_T989UVKL1_CL799405_REV00.rar
Pass: sampro.pl

Thứ Năm, 8 tháng 12, 2011

S5570DDKQ7 Samsung Galaxy Mini Android 2.3.6 Gingerbread India Firmware Update

The first of Asian Android 2.3.6 Gingerbread firmware update for Samsung Galaxy Mini hits over India. This phone commonly known as Samsung Galaxy Pop in Asia. We got the firmware build of S5570DDKQ7 and the default CSC file firmware code for India INU - S5570ODDKQ6. This is a great update for Indian Samsung Galaxy Mini users since its been a while that firmware releases getting too little far away and behind outdated. Well, rejoice! and get your devices upgraded by now.

The rest of Asian countries like Indonesia, Malaysia, Philippines, Singapore, Thailand and Vietnam might getting the updates later before the end of this year because some of  European countries already got it too.
Here's a brief list of countries that already gets the Android 2.3.6 firmware updates a few days ago.

S5570OJVKT1 - Morocco
Android 2.3.6 Gingerbread
Released: November 2011

S5570LWMKPJ - Latin America
Android 2.3.6 Gingerbread
Released: November 2011

S5570XWKQG - United Kingdom (Carphone Warehouse and O2)
Version: Android 2.3.6 Gingerbread
Released: November 2011

You can see the full list  here of which country already gets the said Android 2.3.6 Gingebread updates.
Anyway, you can grab the S5570DDKQ7 stock ROM if you prepare to manually upgrade your Samsung Galaxy mini using Odin instead of Kies.
S5570DDKQ7_S5570ODDKQ6_INU
Password: sampro.pl    credits to: Przekret 

I9000XWJVZ Samsung Galaxy S Android 2.3.6 Gingebread Firmware for Europe version

Here it comes the Samsung Galaxy S I9000 Android 2.3.6 Gingerbread for European Regions. This got the open multi-CSC file that has been built to be use on all unbranded European version of Samsung Galaxy S. The firmware build number is I9000XWJVZ with CSC file I9000OXAJVT and build date of November 2011.
The first Android 2.3.6 Gingerbread released a day ago wasI9000XWJVX and I9000XWJVW that has been released for Poland's T-Mobile and PLUS SGS I9000 and the XWJVW which also hits in Russia and Switzerland.
So, expect for the whole dress up of official Android 2.3.6 Gingerbread for the Galaxy S across the globe this coming few weeks. All advance users over Europe can now used this I9000XWJVZ stock ROM and upgrade their devices to Android 2.3.6. other than that rooting this version is now available. 
Grab the stock ROM
GT-I9000_OXA_ I9000XWJVZ_I9000OXAJVT
Mirror:http://www.multiupload.com/42YX2OIBM5
 password: samfirmware.com

How to install:
- Extract the downloaded I9000XWJVZ
- Ensure your Galaxy S battery is more than 50% charge
- Close Kies and any anti-virus you have..
- Run ODIN - Click the PDA Button then load I9000XWJVZ_I9000OXAJVT.tar.md5 file.
- Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
- When the phone display a download mode Connect your phone to PC
- Once Odin recognize that the phone is already connected, Hit the 'Start' button to begin flashing.
- Do not interrupt the flashing process until it will complete finish. The phone will then re-boot once it completes. Then it's the perfect time to remove or unplug the phone from the PC's USB.
- Perform Factory reset
That's it.

Android 2.3.6 firmware I9100XXKL1for Samsung Galaxy S II released

Alright, here we got another Android 2.3.6 Gingerbread firmware update build for Samsung Galaxy S II I9100. This time the build number is I9100XXKL1 with CSC file I9100OXAKL1. This got the open source multi-CSC file which can be used for all European version of Galaxy S II. We can't tell if this one is much better from the previous released I9100XWKK5 Android 2.3.6 so just check it out by yourself.

Android 2.3.6 firmware I9100XXKL1for Samsung Galaxy S II

Grab the stock ROM  I9100XXKL1_I9100OXAKL1
Mirror:http://www.multiupload.com/FTIPPGGH09
Pass. samfirmware.com

This is a full wipe stock ROM and you need to back up all of your important files stored from your device. You will also need to perform a full wipe factory reset after flashing this ROM to avoid bootloop issues.
So far, these are the Android 2.3.6 Stock ROMs available for Europe Samsung Galaxy S II versions.
I9100XWKK2, I9100XWKK5 and I9100XXKL1.
Hopefully, there will be more ROMs will coming this few days, so check out it later.

Thứ Ba, 6 tháng 12, 2011

Odin Guide on How to Upgrade Samsung Galaxy Ace to Android 2.3.6 Gingerbread Firmware

 Okay, here's the procedure on how to manually upgrade the Samsung Galaxy Ace GT-S5830 to Android 2.3.6 Gingerbread using the stock ROM S5830XXKPP. This is a bit risky on some part for beginners, but since most of us knows that Kies will sometimes messed up like stuck in the middle hanging while updating.
That is why Odin is very useful if using Kies while updating but  failed. By the way,  this Android 2.3.6 Gingerbread is not yet been available for all Galaxy Ace on some countries except in Russia for they got this already as released by Samsung Kies firmware update server. So, anyone who prepares an English (UK and US) and European languages can use this ROM.

Heres' what you need:
Download the stock ROM S5830XXKPP
details:
PDA: S5830XXKPP
Phone: S5830XXKPP
CSC: S5830SERKPP

Android Version: 2.3.6 Gingerbread
Country: Russia
Build date: 2011 October
stock ROM SER_S5830XXKPP_S5830SERKPP
 pass: sampro.pl

Grab the ODIN Multi Downloader v4.38 and OPS File: Cooper_v1.0.ops

Samsung Galaxy Ace Odin flashing Android 2.3.6  S5830XXKPP

- Make sure you are running Windows on your PC with USB driver installed or have Kies installed.
A USB cable wire of your device, a good working USB serial port, sometimes the connection issues occurs because of a bad USB port of your PC and the USB cable.
- Make a back up copy of all important files stored on your phone, the file is a none wipe but it is better to have an extra precautions if something went wrong.
- Disable any antivirus and Kies installed, this program might also interrupt Odin while in flashing process.

1. Once you've already downloaded the S5830XXKPP stock ROM, extract it using winrar, winzip, 7zip or any rar file extractor program you have. Then you in the folder you can see the file
S5830XXKPP_S5830XXKPP_S5830SERKPP_HOME.tar.md5
and the other file which we don't need this 'SS_DL.dll'.
2. Extract and run also the Odin v4.38 on your desktop.
3. On ODIN clickt the OPS button and load the Cooper_v1.0.ops file on it.
4. Hit the One packaged in the checkboxes options (the Auto reboot and protect OPS remain checked,
then at the lower part of Odin click on the One Packaged button then select and load the
S5830XXKPP_S5830XXKPP_S5830SERKPP_HOME.tar.md5



5. Set the Samsung Galaxy Ace in Download Mode:
Turn the OFF the phone or remove the battery for a couple of seconds then put it back again. By pressing Volume Down+Power+ Middle buttons simultaneously the phone will then reboot into download mode.
samsung galaxy Ace Download mode
 6. If the device is already in download mode, connect the phone to PC, on ODIN window a COM Port mapping  turn to color yellow and indicates that the device is already 'added' -  means connected.
7. Once the connection set up is okay, begin the flashing by hitting the 'Start' button.

It only takes around 4 to 5 minutes to complete,  a progress bar on the left side of ODIN will show you the downloading progress. A word "PASS" will display once it finishes.
It's time to unplug the phone from PC, then do a factory data reset to clean all data caches and have a fresh firmware installed,  you can do this by Recovery Mode button - Home + Power Button, then toggle on using the volume button and select Wipe Data/ Factory Reset or by typing this code *2767*3855#.
To check the newly installed firmware update - by typing *#1234#.
Change the default Russian language to your Region, go to settings and then locate the locale and text icon, then find your native language. You may then also often check out the Samsung Galaxy Ace stock ROM list for future firmware updates.

I9000XWJVX I9000XWJVW Samsung Galaxy S I9100 Android 2.3.6 Gingerbread beta release

 Finally,  the official Android 2.3.6 Gingerbread for Samsung Galaxy S GT-I9100 will be coming sooner. The  firmware update with build number I9000XWJVX and I9000XWJVW recently spotted as a test mode (beta version) over Samsung firmware server. The I9000XWJVX is for the carrier branded version of Galaxy S and currently up for Poland's T-Mobile and Plus network providers only. While the I9000XWJVW is for unbranded version of Galaxy S and recently got a build for Russia.


Firmware details:

I9000XWJVX
Region: Poland (Plus)
PDA: I9000XWJVX
Phone: I9000XXJVT
CSC: I9000PLSJV3
Android version: 2.3.6 Gingerbread
 Product Code: GT-I9000HKDPLS
Latest firmware: I9000XWJVX/I9000PLSJV3/I9000XXJVT/I9000XWJVX
Modified: 11/22/2011 7:45:08 PM

I9000XWJVX
Region:  Poland (T-Mobile)
PDA: I9000XWJVX
Phone: I9000XXJVT
CSC: I9000ERAJV3
Android version: 2.3.6 Gingerbread
 Product Code: GT-I9000HKDERA
Latest firmware: I9000XWJVX/I9000ERAJV3/I9000XXJVT/I9000XWJVX
Modified: 11/23/2011 11:43:29 AM

I9000XWJVW
Region: Russia
PDA: I9000XWJVW
Phone: I9000XXJVT
CSC: I9000SERJV5
Android version: 2.3.6 Gingerbread
Product Code: GT-I9000HKDSER
Latest firmware: I9000XWJVW/I9000SERJV5/I9000XXJVT/I9000XWJVW
Modified: 11/23/2011 4:20:53 PM

The stock ROMs are available for grab now , just take note this are not officially released yet by Samsung (but often to be officially rolled out sooner). Again, this is a beta released and available in Kies for advance users and testers only, this is not recommended to use for ordinary users who doesn't have enough knowledge on how to tweak the phone's firmware.

Here's the unmodified and untouch Android 2.3.6 I9000XWJVX and I9000XWJVW stock ROMs from sammobile.

I9000XWJVX - Poland T-Mobile
GT-I9100_I9000XWJVX_I9000ERAJV3_ERA

I9000XWJVX - Poland Plus
GT-I9100_I9000XWJVX_I9000PLSJV3_PLS


 I9000XWJVW - Russia
GT-I9100_I9000XWJVW_I9000SERJV5_SER
passwords: samfirmware.com


We expect more available Android 2.3.6 Gingerbread leaks for Samsung Galaxy S this month. So, we will try to keep an eye if there's any newest updates over Samsung Kies server and keep this blog just a bit updated.

Update: added
I9000XWJVW
Region: Switzerland
PDA: I9000XWJVW
Phone: I9000XXJVT
CSC: I9000OXXJV9
Android version: 2.3.6 Gingerbread
 Product Code: GT-I9000HKDAUT
Modified: 2011-11-04
HIDSWVER: I9000XWJVW/I9000OXXJV9/I9000XXJVT/I9000XWJVW

I9000XWJVW - Switzerland
GT-I9100_I9000XWJVW_I9000XXJV9_AUT
password: samfirmware.com

I9100TDUKJ1 Android 2.3.5 Firmware for Australia Vodafone Samsung Galaxy S II I9100T Leaks

The Android 2.3.5 Gingerbread Firmware for Vodafone Australia Samsung Galaxy S II recently leaks. The firmware build number is I9100TDUKJ1 with the CSC file I9100TVAUKJ1  which is the default firmware code for Australia's Vodafone. We don't know if  this ROM is already on the hands of Vodafone's technical team for a test run.We aren't sure that this must be officially rolled out sooner but  hopefully as far as if it passes from the test and this ROM runs smoothly and found without any serious bug issues, it will be push officially via OTA or Kies server.

European versions of Samsung Galaxy S II which is also provided by Vodafone had been already got the official Android 2.3.5 Gingerbread a few weeks ago with build number I9100BUKJ3 while the  Vodafone  Australia's Samsung Galaxy S II are still recently running with the firmware build  I9100TDUKF4 which is 2.3.3 Gingerbread and was a maintenance released on September 2011.

Samsung Galaxy S II I9100T Vodafone Australia current firmware details:
Android Version: 2.3.3
Baseband Version: I9100TDUKF4
Kernel Version: 2.6.35.7-I9100TDUKH1-CL474234 root@DELL131 #2
Build Number: GINGERBREAD.DUKH1
But, anyway the stock ROM I9100TDUKJ1 is now available for grab, this one is for advance users and beta testers that now wants to try out the Android 2.3.5 Gingerbread firmware build.

Here's the I9100TDUKJ1 stock ROM. GT-I9100T_VAU_I9100TDUKJ1_I9100TVAUKJ1

password is: samfirmware.com
We are currently downloading the ROM at this time, the file is around 690 MB. We will try to update this post if there's any interesting features and enhancement if ever we encounter after flashing it.

You may also take a visit at the Vodafone's official website in Australia to check out if the official firmware update is already available.

Thứ Hai, 5 tháng 12, 2011

S5830XXKPP Samsung Galaxy Ace Android 2.3.6 Stock ROM

Finally we got the first Android 2.3.6 Gingerbread for Samsung Galaxy Ace S5830, this ROM has been reported as an official firmware update in Russia but not confirmed yet. The firmware build number is S5830XXKPP with CSC file SER - S5830SERKPP a firmware letter code for Russia. So the default language of this ROM is Russian but mostly European and English language were also included for it is indicated as 'XX'- which is a regional firmware release code for European regions.

Firmware details:
PDA: S5830XXKPP
Phone: S5830XXKPP
CSC: S5830SERKPP
Version: Android 2.3.6 Gingerbread
Build date: October 10, 2011

The file is compressed in a single packaged .tar.md5 - the BOTLOADER,  PDA,and CSC were combined in a single Odin flashable stock. Just put that file in the 'One packaged' in Odin button if you want to manually upgrade your device. You can grab the stock ROM via Przekret who shared us this file. This ROM is around 100 MB in size.  GT-S5830_SER_S5830XXKPP_S5830XXKPP_S5830SERKPP
Mirror:http://www.multiupload.com/ORRNNWU4RG
Pass: sampro.pl
Asian, Latin America and Arabic Android 2.3.6 for Galaxy Ace might came out sooner. You may check out the Samsung Galaxy Ace most latest firmware available in each specific countries - view Stock ROM list here.

I9000XWJVX I9000XWJVW Samsung Galaxy S I9100 Android 2.3.6 Gingerbread beta release

Finally,  the official Android 2.3.6 Gingerbread for Samsung Galaxy S GT-I9100 will be coming sooner. The  firmware update with build number I9000XWJVX and I9000XWJVW recently spotted as a test mode (beta version) over Samsung firmware server. The I9000XWJVX is for the carrier branded version of Galaxy S and currently up for Poland's T-Mobile and Plus network providers only. While the I9000XWJVW is for unbranded version of Galaxy S and recently got a build for Russia.

Firmware details:

I9000XWJVX
Region: Poland (Plus)
PDA: I9000XWJVX
Phone: I9000XXJVT
CSC: I9000PLSJV3
Android version: 2.3.6 Gingerbread
 Product Code: GT-I9000HKDPLS
Latest firmware: I9000XWJVX/I9000PLSJV3/I9000XXJVT/I9000XWJVX
Modified: 11/22/2011 7:45:08 PM

I9000XWJVX
Region:  Poland (T-Mobile)
PDA: I9000XWJVX
Phone: I9000XXJVT
CSC: I9000ERAJV3
Android version: 2.3.6 Gingerbread
 Product Code: GT-I9000HKDERA
Latest firmware: I9000XWJVX/I9000ERAJV3/I9000XXJVT/I9000XWJVX
Modified: 11/23/2011 11:43:29 AM

I9000XWJVW
Region: Russia
PDA: I9000XWJVW
Phone: I9000XXJVT
CSC: I9000SERJV5
Android version: 2.3.6 Gingerbread
Product Code: GT-I9000HKDSER
Latest firmware: I9000XWJVW/I9000SERJV5/I9000XXJVT/I9000XWJVW
Modified: 11/23/2011 4:20:53 PM

The stock ROMs are available for grab now , just take note this are not officially released yet by Samsung (but often to be officially rolled out sooner). Again, this is a beta released and available in Kies for advance users and testers only, this is not recommended to use for ordinary users who doesn't have enough knowledge on how to tweak the phone's firmware.

Here's the unmodified and untouch Android 2.3.6 I9000XWJVX and I9000XWJVW stock ROMs from sammobile.

I9000XWJVX - Poland T-Mobile
GT-I9100_I9000XWJVX_I9000ERAJV3_ERA

I9000XWJVX - Poland Plus

GT-I9100_I9000XWJVX_I9000PLSJV3_PLS



 I9000XWJVW - Russia
GT-I9100_I9000XWJVW_I9000SERJV5_SER

passwords: samfirmware.com


We expect more available Android 2.3.6 Gingerbread leaks for Samsung Galaxy S this month. So, we will try to keep an eye if there's any newest updates over Samsung Kies server and keep this blog just a bit updated.

Chủ Nhật, 4 tháng 12, 2011

I727RUXKJ7 Rogers Samsung Galaxy S II LTE Original Stock ROM

Here's the official stock ROM for Rogers Canada carrier branded version of Samsung Galaxy S II LTE SGH-I727R. This is the original Android 2.3.5 Gingerbread stock firmware with build number I727RUXKJ7  and I727RRWCKJ7 CSC file. This ROM is not a rooted, unmodified and untouched and pulled directly from Samsung official firmware server.

This is very useful for fixing the device if somehow a soft-brick might happen or if you might want reverting your Galaxy S II LTE I727R back to original stock when you've previously installed it a custom ROM and unless you need warranty. 

This has been tested and already proven works but not recommended not been tested with the AT&T Samsung Galaxy S II Skyrocket I727. There is a another stock ROM available for AT&T Skyrocket here.
So, this ROM is only for Rogers Samsung Galaxy S II LTE I727R, use it at your own risk.

Biggest thanks to Przekret at XDA for sharing this to us!
Stock ROM Samsung Galaxy S II LTE I727RUXKJ7
SGH-I727R_RWC_I727RUXKJ7_I727RRWCKJ7_I727RUXKJ7
Mirror:http://www.multiupload.com/8WTB00D7KL
password: sampro.pl

How to Flash with Odin:
Back up all of your important files stored on the device before flashing, it's a bit  risky task and might get your device into trouble so proceed with precautions.
- Ensure that your phone is fully charge (highly recommended) or at least 50% charge.
1. You need Odin 1.85
2. Extract the file.
3. Run Odin
 - Only 'Auto-Reboot',  all other checkboxes remain unchecked.
4. Click the PDA button and select the TAR file you downloaded.
5. Put your Samsung Galaxy S II LTE into Download Mode:
Hold down Volume Up and Volume Down buttons. ( It may be just Vol Down.) then insert the USB cable into your phone.
- if the connection set-up failed, remove the battery and then reinsert it back again. Then repeat the Download
 mode set up.
6. Once you see that the phone is in Download Mode. You may then hit the 'Start' button.

Then do a factory reset, because once the flashing finishes the phone will stuck in a boot logo (boot loop- it keeps on showing the big letter S and under it says Samsung Galaxy SII LTE)
1. Power off phone or remove the battery for a couple of seconds then put it back again.
2. Simultaneously, press and hold Volume Up + Volume down + Camera buttons .
3. Do not release the buttons until you see the Samsung Logo appears.
4. Hold until a 3E Recovery screen came up.
5. Toggle down and Select the options to Wipe Data and Clear Cache.
6. Then Reboot Phone and check out your device.
    If you want to Root your Rogers Samsung Galaxy S II LTE, the Easy Root works on this I727RUXKJ7 or Android 2.3.5 Gingerbread stock ROM.

    Thứ Bảy, 3 tháng 12, 2011

    Samsung Galaxy Y S5360 Original Stock ROMs Firmware Packaged

    This is a list of available Stock ROMs for Samsung Galaxy Y S5360 Official or original stock ROMs firmware from the first released up to the latest firmware updates. This files is usable to flash update or downgrade the device firmware to its original factory default firmware settings.


    "NOTE: This firmwares or ROM's are for Samsung Galaxy Y S360 only. DO NOT EVER attempt to flash it to other device other than the Samsung Galaxy Y S5360. Make sure you always use firmware files which is created for your specific country or network provider, to prevent any problems and avoid any functionality issues.
    Disclaimer: Be careful in flashing the device, always proceed with precautionary measures to avoid bricking the phone...  We are not held responsible any cause might happen to your phone by using this files. Proceed at your own risk!.

    How to check your Samsung Galaxy Y firmware:
    Type this code *#1234# on your phone to know the firmware version of your device.
    Then you'll get a firmware details like this.

    PDA: S5360XXKI9
    PHONE: S5360XXKI9
    CSC: S5360XENKI3
    version: Android 2.3.5


    Europe Firmware - European Version of Samsung Galaxy Y S5360

    Europe Regional Firmware Codes:
    XA - Austria, France, Germany, Italy, Netherlands, Switzerland, United Kingdom
    XB - Denmark, Norway, Sweden
    XC - Portugal, Spain
    XD - Croatia, Czech, Hungary, Slovakia
    XE - Bulgaria, Estonia, Kazakhstan, Latvia, Lithuania, Russia, Ukraine, United States
    XF - Bulgaria, Croatia, Romania
    XG - among others Germany
    XP - UK, France, Italy, Spain, Netherlands, Poland, Portuguese, Turkey
    XX - Austria, Belgium, France, Netherlands, Poland, Germany, Hungary, Italy, Spain, United Kingdom
    XW - Austria, Belgium, France, Netherlands, Poland, Germany, Hungary, Italy, Spain, United Kingdom

    S5360XXKI6
    Region: Austria, Belgium, France, Netherlands, Poland, Germany, Hungary, Italy, Spain, United Kingdom
    PDA: S5360XXKI6
    PHONE: S5360XXKI6
    CSC: Multi_S5360OXXKI6
    Version: Android 2.3.5 Gingerbread
    Date: September 2011
    Stock ROM : GT-S5360_OXX_S5360XXKI6

    Mirror: http://www.multiupload.com/XY1PKJFY70

    Password: sampro.pl

    S5360XXKI9
    Region: Netherlands - XEN
    Product Code: GT-S5360MAAXEN
    Firmware details:
    PDA: S5360XXKI9
    PHONE: S5360XXKI9
    CSC: S5360XENKI3
    Version: Android 2.3.5 Gingerbread
    Date: September 2011
    Stock ROM: GT-S5360_XEN_S5360XXKI9

    Mirror:http://www.multiupload.com/CZ51WMBB8K

    Password: sampro.pl

    S5360XXKJ2
    Region: Netherlands - VDP
    Firmware details:
    PDA: S5360XXKJ2
    PHONE: S5360XXKJ2
    CSC: S5360VDPKJ2
    Version: Android 2.3.6 Gingerbread
    Date: October 2011
    Stock ROM: GT-S5360_VDP_S5360XXKJ2

    Mirror:http://www.multiupload.com/ZWT5Y852MQ

    Password: sampro.pl

    S5360XXKJ3
    Region: Netherlands - KPP
    Firmware details:
    PDA: S5360XXKJ3
    PHONE: S5360XXKJ3
    CSC: S5360KPPKJ1
    Version: Android 2.3.6 Gingerbread
    Date: October 2011
    Stock ROM: GT-S5360_KPP_S5360XXKJ3

    Mirror:http://www.multiupload.com/ASZKKXY3MK

    Password: sampro.pl

    S5360XXKJ4
    Region: Czech Republic - XEZ
    PDA: 5360XXKJ4
    PHONE: 5360XXKJ4
    CSC: S5360OXXKJ4
    Version: Android 2.3.6 Gingerbread
    Date: October 2011
    Stock ROM:GT-S5360_XEZ_S5360XXKJ4

    Mirror:http://www.multiupload.com/A6E0278OY3

    Password: sampro.pl

    S5360XXKJ4
    Region: Poland - XEO
    Product Code: GT-S5360MAAXEO
    Firmware details:
    PDA: 5360XXKJ4
    PHONE: 5360XXKJ4
    CSC: S5360OXXKJ4
    Version: Android 2.3.6 Gingerbread
    Date: October 2011
    Stock ROM: GT-S5360_XEO_S5360XXKJ4
    Password: sampro.pl

    Czech Republic
    Product Code: GT-S5360MAAXEZ
    HIDSWVER: S5360XXKJ4/S5360OXXKJ4/S5360XXKJ4/S5360XXKJ4

    Netherlands
    Product Code: GT-S5360MAAXEN
    HIDSWVER: S5360XXKI9/S5360XENKI3/S5360XXKI9/S5360XXKI9

    Netherlands
    Product Code: GT-S5360MAAVDP
    HIDSWVER: S5360XXKJ2/S5360VDPKJ1/S5360XXKJ2/S5360XXKJ2

    Netherlands
    Product Code: GT-S5360MAAKPP
    HIDSWVER: S5360XXKJ3/S5360KPPKJ1/S5360XXKJ3/S5360XXKJ3

    Poland
    Product Code: GT-S5360MAAXEO
    HIDSWVER: S5360XXKJ4/S5360OXXKJ4/S5360XXKJ4/S5360XXKJ4

    Network Provider Firmwares
    Carrier Branded version of Samsung Galaxy Y S5360

    S5360BOKJ1
    Carrier: T-Mobile
    Region: Netherlands
    PDA: S5360BOKJ1
    PHONE: S5360BOKI3
    CSC: S5360TNLKJ1
    Version: Android 2.3.6 Gingerbread
    Date: October 2011
    Stock ROM: GT-S5360_TNL_S5360BOKJ1

    Mirror:http://www.multiupload.com/O9H3UDKTKN

    Password: sampro.pl

    S5360BOKJ1
    Carrier: T-Mobile
    Region: Germany
    PDA: S5360BOKJ1
    Phone: S5360BOKI3
    CSC: S5360DTRKJ2
    Version: Android 2.3.6 Gingerbread
    Date: October 2011
    Stock ROM: GT-S5360_DTR_S5360BOKJ1

    Asia Firmwares - Asia Pacific, South East Asian version of Samsung Galaxy Y S5360

    Asia Regional Firmware Codes
    DB - Vietnam
    DC - Thailand
    DD - India
    DX - Indonesia, Malaysia, Philippines, Singapore, Vietnam
    DZ - Malaysia, Singapore
    ZC - China, Hong Kong
    ZH - Hong Kong
    ZT - Taiwan


    S5360DXKJ3
    Region: Indonesia - XSE

    PDA: S5360DXKJ3
    PHONE: S5360DXKJ1
    CSC: S5360OLBKJ2
    Version: Android 2.3.6 Gingerbread
    Date: October 2011

    Stock ROM: GT-S5360_XSE_S5360DXKJ3

    Mirror:http://www.multiupload.com/9R2G583WQN

    Password: sampro.pl


    S5360DXKK4
    Region: Philippines - XTE

    PDA: S5360DXKK4
    PHONE: S5360DXKK2
    CSC: S5360OLBKK1
    Version: Android 2.3.6 Gingerbread
    Date: November 2011

    Stock ROM: GT-S5360_XTE_S5360DXKK4

    Mirror:http://www.multiupload.com/W5WYSNGW93

    Password: sampro.pl



    S5360ZCKK2
    Region: China - Hong Kong

    PDA: S5360ZCKK2
    PHONE: S5360ZCKK2
    CSC: S5360OZHKK2
    Version: Android 2.3.5 Gingerbread
    Date: November 2011

    Stock ROM: GT-S5360_OZH_S5360ZCKK2

    Mirror:http://www.multiupload.com/SCNJ40FS2Z


    The stock ROMs above was pulled from Samsung Kies server and was originally uploaded and filed at sampro.pl. So, the credit goes to them.


    We will try to keep this list updated from time to time if there are any latest available stock ROMs pulled from official firmware updates releases for Samsung Galaxy Y S5360.