Motorola [ROM] Rubix 2.0 [Motorola Droid-X]

[ROM] Rubix 2.0 [Motorola Droid-X]
Rubix 2.0 is a Froyo based ROM YOU MUST BE ON 2.3.340 OTA FOR THIS TO WORK
ALSO NOTE: IF YOU INSTALLED THE NEW TRANQUILITY, THE TOOLBOX WILL INSTALL UNLESS YOU SBF BEFORE INSTALL. THIS IS TRUE FOR ANY ROM, NOT JUST RUBIX.
IF YOU USED THE NEW SCRIPT, YOU MUST REBOOT AFTER INSTALL AND INITIAL SETUP
This script runs on first boot to scan the SDCard rubiX Folder for apps. If they are there, it copies them to /data/app and corrects their permissions. Reboot for this to take effect.
YOU MUST wipe data before install.
Change Log for 2.0:
* Sysctl.conf adjustments:
Changed vm.dirty_background_ratio to 70 from 60
* Added rm /dev/log/main for extra performance/free memory
* Changed NO_NEW_FAIR_SLEEPERS to NO_FAIR_SLEEPERS; this was a typo, as there are no new fair sleepers in the dx kernel already.
* Cleaned up the /system/app folder
The following market apps were further removed:
Talkback
Kickback
Soundback
* Added new Interactive and Conservative kernel scaling governors (credit Milestone team)
This is a Droid X first. These two governors bring a big difference to the table; here is what they do:
(Credit Cyanogenmod GITHub for this, source is here: https://github.com/CyanogenMod/cm-ke…/governors.txt
Interactive:
Advantages:
+ significantly more responsive to ramp cpu up when required (UI interaction)
+ more consistent ramping, existing governors do their cpu load sampling in a workqueue context, the ‘interactive’ governor does this in a timer context, which gives more consistent cpu load sampling.
+ higher priority for cpu frequency increase, rt_workqueue is used for scaling up, giving the remaining tasks the cpu performance benefit, unlike existing governors which schedule rampup work to occur after your performance starved tasks have completed.
Conservative:
The CPUfreq governor "conservative", much like the "ondemand"
governor, sets the CPU depending on the current usage. It differs in
behaviour in that it gracefully increases and decreases the CPU speed
rather than jumping to max speed the moment there is any load on the
CPU. This behaviour more suitable in a battery powered environment.
The governor is tweaked in the same manner as the "ondemand" governor
through sysfs with the addition of:
freq_step: this describes what percentage steps the cpu freq should be
increased and decreased smoothly by. By default the cpu frequency will
increase in 5% chunks of your maximum cpu frequency. You can change this
value to anywhere between 0 and 100 where ’0′ will effectively lock your
CPU at a speed regardless of its load whilst ’100′ will, in theory, make
it behave identically to the "ondemand" governor.
down_threshold: same as the ‘up_threshold’ found for the "ondemand"
governor but for the opposite direction. For example when set to its
default value of ’20′ it means that if the CPU usage needs to be below
20% between samples to have the frequency decreased.
Basically, this means more speed and battery life control
* Adjusted 01cpu for a better sampling rate if the new conservative governor is found.
* Added script: gov
gov allows you to control which governor you use; ondemand, conservative, or interactive. The function is:
gov -ondem for the ondemand governor
gov -cons for the conservative governor
gov -inter for the interactive governor
Alternately, these can be changed via SetCPU or Droid Overclock.
To remove data throttling, click link below
http://www.mediafire.com/?ahu1g7nzv4hbxtr
Credit to Plower.Net
How to install:
1.Download
2.Place on SDCard
3.Bootstrap Recovery via Bootstrap App
4.Reboot to Clockwork Mod Recovery
5.Wipe data/factory reset
6.Select install from sdcard
7.Choose zip from sdcard
8.select rubiXFocused2.0.zip
Select yes
Reboot
Enjoy!
ROM download link below:
http://www.mediafire.com/?6s32joduwkwyhwa
There are no screenshots provided by the developer of this rom.

Read More

Motorola [ROM] GINGERALE 3.0 STABLE RELEASE [Motorola Droid-X]

GingerAle is now in ROM Manager under TeamChargeDev
GingerAle based on Gingerbread ROM What’s Included:
-Themed GingerBlur Home
-CRT Animation
-Lots of Status Bar Changes
-Bloatware Removed
-DX2 Boot Animation (DX Boot Anim. w/ Sound)
-DX2 Wallpapers
-Themed Dialer
-All Red and Blue Highlights
-Old Blur Load/Spinner Sequence
-Build.prop Edits
-Eri.xml heavily edited
-…and much much more!
Screenshot:



Download Link:
http://www.mediafire.com/?1q27phrn8oz9363
INSTALL INSTRUCTIONS:
1. Get Rooted on any System
2. Get DX Bootstrap Recovery
3. Flash DXBR or D2BR Depending if on GB already!
4. Wipe Data/Cache
5. Install from SD Card
6. When done reboot system!
7. Enjoy
-If you are coming from the beta…NO NEED TO WIPE DATA/CACHE JUST INSTALL!
-It may boot loop…Just go into stock recovery and wipe data again then reboot!
-You can now simply Download from the ROM Manager App and follow the directions there!
—————————————————————————–
ChangeLog: 3.0
Took Out Netflix (Only Works on 2.2)
Added Gtalk Working! (Works with set Per.)
Deleted FriendShare
Maximum Bloatware Gone
Themed Press to Red
Heavy Edits on Binary
Superuser Running Smoother
Minor Tweaks to Scrolling
and much much more!
Note: If you have any bug reports or complaints report them to me on Twitter…@TeamChargeDev or by Email…. SeanMyers10@gmail.com

Read More

How to Install Verizon Motorola Droid X 2.3 Gingerbread 4.5.596 Official Update - Procedures

Here's the procedures on how to install the Motorola Droid X latest 2.3 Gingerbread 4.5.596.MB810 update, an official release by Motorola and Verizon. I listed here all the needed upgrade method  paths from beginners and advance users.

Firmware Upgrade method from  automatic server initiated: 
 1. If you already receive an update  notification on your Motorola Droid X screen. Just tap the "Download".

2. Then select "Install Now". The phone will then reboot  and initiate the installation process.

3.Once completed the phone will reboot and then tap "Okay" button to confirm the new upgrade installation.

Firmware Upgrade method by  manual server initiated:
1. From the main home screen, tap on the “Menu” and select  “Settings” by scrolling down tap on the “About Phone”..

2. Next  tap on the "System Updates".

3. Select the “Download”  to proceed.

4. Once the download finished, tap the “Install now”. The installation will then begins, and the process may take about 45 to 50 minutes. (depends on server rate/speed)

5. Just wait until the installation process completes...

Motorola Droid X 2.3 UPGRADE PATHS for Advance Users:

p3droid from droidworld prepared an upgrade methods.

Method One
The first method to upgrade to gingerbread from froyo is to sbf you phone back to stock froyo (2.3.340) and await for the upgrade OTA.

Method Two
The second method to upgrade to gingerbread from froyo is to sbf you phone back to stock froyo (2.3.340) and use the 2 install files from below.

Method Three
The third method is for anyone currently running a Gingerbread leak (588/591/595). You can just install the appropriate zip right over the top of your previous build.

Just follow the installation steps and procedures on this thread.

Read More