How to Update Arabic Android 2.3.4 Gingerbread on Samsung Galaxy S SL I9003 JPKP5 Firmware

This is a step by step guide on how to manually upgrade or update the Samsung Galaxy S SL I9003 to the latest Android 2.3.4 Gingerbread Arabic firmware version released with build number I9003JPKP5. This ROM  has been reportedly an official released fro Arabic region users of  Galaxy SL I9003. This firmware were already been tested and works with better performance to the device.

Disclaimer: We are not responsible if you may bricked your phone by following this procedure, proceed at your own risk and take extra precautions. Remember this is a stock ROM, flashing this unto your Samsung galaxy S SL GT-I9003 needs extra precaution or you might end up bricking your phone, if you are not familiar in flashing by way of using Odin tool, do not attempt to try it unless you already done careful research and knows exactly what to do.

 Firmware details:
Build number: I9003JPKP5 - default Arabic language
Version: android 2.3.4 Gingerbread
BOOTLOADER: APBOOT_I9003JPKP5_CL482273_REV08_user_low_ship.tar .tar
PDA: CODE_I9003JPKP5_CL482273_REV08_user_low_ship.tar.t ar
CSC: I9003OJPKP6_CL491426_CSC.tar.tar
PHONE: MODEM_I9003JXKP3_REV_00_CL1040711.tar.tar

Download the following firmware files:

Samsund Galaxy S SL Arabic Firmware I9003JPKP5 Android 2.3.4 Gingerbread.
via samfirmware.com link.password is  samfirmware.com

PIT File: latona_20110114
ODIN: Odin3 v1.82.exe


ODIN Flashing Procedure to Upgrade Samsung Galaxy S SL I9003 to Android 2.3.4 Gingerbread I9003JPKP5 Firmware.

Important: Do have a back up copy of all your important data stored from your Galaxy S SL before proceeding. Just use any back-up application you may have, for it will be all wipe out after this process.
Ensure that the battery is well charge, much better if it's full.
Use a good working PC and a cable wire to avoid any interruption issues.


1. Download and extract the XXKP9 2.3.4 Gingerbread
2. Run ODIN3 v1.83.exe
3. Click PIT button then select and load the file: latona_20110114.pit
     Ensure that the Re-partition, Auto Reboot and F-Reset Time are checked.
3) Turn off your device or remove the battery for a seconds and put it back again, then you need to hold down the Volume Down button + the Home key button (the middle button) and then pressing the Power button. You will then see a downloading display like the image below.

 
Then connect the phone to PC. The ID:COM box will show you an indication if the device is already connected or detected on the PC.

5. Hit the "START" Button to begin flashing the PIT file.

6. Once finish flashing the PIT file, on ODIN click the "RESET" button. (Re-Partition checkbox will automatically uncheck.)
7. Now load all the needed binary files on ODIN.

Click BOOTLOADER button and select this file: APBOOT_I9003JPKP5_CL482273_REV08_user_low_ship.tar

Click PDA button and select this file:
CODE_I9003JPKP5_CL482273_REV08_user_low_ship.tar

Click PHONE button and select this file:
MODEM_I9003JXKP3_REV_00_CL1040711.tar.tar

Click CSC button and select this file:
GT-I9003-CSC-I9003OJPKP6_CL491426_CSC.tar

Turn OFF the Samsung Galaxy I9003 or remove the battery and reinsert it back again. Then boot the phone into Download Mode again. (Volume Down+Home+Power button).
Hit "START" button to flash the Bootloader, PDA, Phone and CSC files.
Do not touch anything until it finishes, you will then see a word "PASS" on ODIN window when it successfully completes.

Once the flashing finishes remove your device Galaxy S SL I9003 from PC.You may then confirm and check your newly installed firmware through your About Phone Settings. Do a factory  reset to clear cache and have a newly fresh firmware update.
Don't hesitate to send us feedbacks or any further questions on our comment form below.

Read More

Samsung Galaxy SL I9003 Gitaxian ROM Gingerbread based CUSTOM ROM

Here's another coolest custom ROM for Samsung galaxy S SL i9003 developed by Namalessat XDA-developer. This ROM reportedly work perfect as smooth as you never had before and been used by a lot Samsung Galaxy SL users over Europe.

Here's a word from the creator of this ROM:

Hello everyone!
Sorry if I have not yet released the new version of my ROM, but unfortunately I have to give my time to me and my family.

With this message I want to ask all possible help from you. Unfortunately I live alone and I also have to make the home so I kindly ask you to help me.

I am happy to help the people who owns the phone I9003, but I request to you that you have more time to compensate me for my shortcomings.

First of all thank those who these days are helping those who want to use my ROM in your phone, helping to install and remove the doubts that before installing my ROMs.

I want to change the name of the ROM because I do not hear me, but I think it of you all. You who believe in my potential. You who trust my work. You try that with your time and give suggestions. I chose the new name and I think you will like.

Gitaxian ROM

The name comes from the Gypsies, which means "people" in Latin (me being Italian I like the Latin) and I think it is a ROM based entirely on your thoughts and suggestions I think it's the right name for this ROM.

ROM is now seen that the people I ask you to help me in this huge project that requires a lot of time and energy.

I'm not good at English because I studied until the eighth grade so I do not have the knowledge to answer all your questions. Google Translator helps me but not enough. There are people, friends who help me by giving support and explanations and I would like to raise awareness of this process because it requires time and knowledge of life on Android phones. Each of you can help with guides, previews, tips and helping others.
One thing that gave me the sadness is little collaboration between developers of ROM. I gave my support to two ROM which I could make a difference, but unfortunately everyone pulls water to his mill. I think you phone users, others think their project. I am sad for what happened and having no support from them asking for help to you who have interest in owning a phone that works well and works the way you want.

I apologize again to dwell on but I am convinced that many of you will understand my state of mind and I will support this mission. Making our better phone!

I can not waste time guides, images and more, I need to concentrate on what you do not know. I therefore ask you to take care of what you can do, help others, give advice and guides to use for your ROM.

I preferred to give space to my thoughts and what I want to convey to you all because I think it is more important than the relationship between the developer and the user that the instrument.

We can try with this guide:

1. Install complete firmware XXKPE.
2. Install my rom in PDA section of ODIN. No need CFRoot, integrate in my rom.
3. When finish my rom go device in Recovery, you need to delete dalvik cache and cache (not need factory reset).

Using 1.3 since yesterday morning and everything works great. Battery life is very good with data connection always up (way more than a day of use).

• Wifi and gps work perfect
• camera works fine
• the more i see the theme the more i love it
• needed to push gmail to system apps to make it work, simply installed from market gmaps (i suggest to keep it in ROM most of users need them)
• did not tweak anything about graphics performance
• converted to ext4 (i suggest to make it default  )
• pushed new market to system apps as also social hub and im (do not push email.apk from sgsII it FC)
• installed Vlingo, now from market (it's the free version of the branded voicecommand of sgsII) and works great
• installed flash player (i suggest keeping it by default) but sometime when i browse with firefox and even maxthon, it is not recognized it and they warn that a plugin is needed

Screenshots:






To get the Gitaxian ROM, head over at XDA-Developer thread.

Read More

Arabic Android 2.3.4 Gingerbread firmware I9003JPKP5 for Samsung Galaxy S SL I9003

This is a good news for Samsung Galaxy S SL I9003 users with Arabic versions.  SamFirmware previously announce that the new Arabic firmware Android 2.3.4 Gingerbread for Samsung Galaxy S SL I9003 is now available online.  The firmware version build number is I9003JPKP5 with a build date of August 2011.

This is a stock ROM version that can be install or flashable on Galaxy SL using Odin. As of now, this is the only Android 2.3.4 Gingerbread avialable via samfirmware since I9003JPKD1 and I9003JPKE1 were both 2.2.1 Froyo. But according to samfirmware they will add more Arabic Android 2.3 Gingerbread for Samsung Galaxy SL I9003 on their list soon. So anyone who wants to upgrade their SGS SL I9003 device to I9003JPKP5 2.3.4 Gingerbread can grab a copy directly from SamFirmware website or just click the link below.

Just a simple reminder - remember this is a stock ROM, flashing this unto your Samsung galaxy S SL GT-I9003 needs extra precaution or you might end up bricking your phone, if you are not familiar in flashing by way of using Odin tool, do not attempt to try it unless you already done careful research and knows exactly what to do.

Along with new Arabic firmware Samsung Android devices are as follows:
Samsung Galaxy S plus I9001
- I9001JPKF7
- I9001JPKG1

Samsung Galaxy Ace S5830
- S5830JPKP9

Samsung Galaxy Gio S5660
- S5660JPKE1


Download Samsund Galaxy S SL Arabic Firmware I9003JPKP5 Android 2.3.4 Gingerbread.
via samfirmware.com link.

Read More

Odin Flash Procedure on How to Upgrade Samsung Galaxy S SL I9003 to Android 2.3.4 Gingerbread I9003XXKPH

Here's a step by step guide on how to manually upgrade or update the Samsung Galaxy S SL I9003 to the latest Android 2.3.4 Gingerbread  firmware version released with build number I9003XXKPH (Europe) with CSC file I9003SERKPH (Russian default language)

Disclaimer: We are not responsible if you may bricked your phone by following this procedure, proceed at your own risk and take extra precautions.

Thanks to spacebar2011 for providing this guide I just added some useful screenshots for beginners,
and samfirmware.com for the firmware packaged link.

Firmware Details:
Version:  Android 2.3.4 Gingerbread
ROM: I9003XXKPH
CSC: SER
PIT: latona_20110114
Date: 2011 August 9
 DOWNLOAD
Password is samfirmware.com

Flash Procedure for beginners: 
If your Samsung Galaxy I9003 is now on froyo and not yet runs on Android 2.3.4 XXKPE, (check the version via *#1234#) You need to upgrade first to I9003XXKPE. Download the firmware via samfirmware link Download: http://hotfile.com/dl/125246801/36c9...XXKPE.rar.html
Password: samfirmware.com
If you already runs on XXKPE do a Factory reset  first before flashing XXKPH.
Don't Forget to back up of all important files stored on the device before flashing.
Ensure that the battery is not in a low voltage condition or at least 50% or best if fully charge.

1) Extract the previously download firmware using winrar or winzip.
2) Run ODIN downloader tool. On Odin do not check Repartition checkbox option, just leave the Auto-Reboot and F.Reset Time checked.
Click on the PDA button and then select and load the I9003XXKPH_I9003XXKPH_I9003SERKPH.HOME.tar file.


3) Turn off your device or remove the battery for a seconds and put it back again, then you need to hold down the Volume Down button + the Home key button (the middle button) and then pressing the Power button. You will then see a downloading display like the image below.



4) Connect your phone with your computer the ID:COM box will turn to a yellow colour to indicate that the phone is connected to the PC properly. If you still do not get any results, try another USB cable wire and USB port on your computer.
5 ) Once all set and ready, Hit the "START" button to begin downloading the firmware. 
6) Do not touch anything till you see "PASS" word on the program window. The phone will then reboot, and it may takes some time to boot up, it's normal don't panic.
7) Just do a factory reset after flashing to regain a fresh firmware update.
8) Change the default language according to your regions.


Here's the firmware feedback from Misledz @XDA.

NOTE: As most of you think this is leaked, It has been discussed by members in a massive post count that it remains official and it is. You can tell by holding the power button and home button till the phone fades off to restart. When it does you can identify, Unknown Upload Mode means you are still under beta where as if the phone reboot's/shows a tiny computer with a phone icon means it's stable. Only leaks had the issues regarding this.

Sound: Sound remains the same, there is no real improvement towards this but however there is a kernel change, Hopefully in the upcoming months this could help add a support or open a window to our now ever so stable GB ROM. This includes Voodoo Audio support.

Graphics: No real boost or improvement rather there are some hotfixes, There have been some textures that have been fixed, on games such as Sacred Odyssey had texture issues regarding grass. However in this version there is no issue regarding that. Horsie runs fine and no issues. Happy day. However this also might also open a window to Voodoo Color. *Please research this for more info*

Response Time: Seems there has been some major fixes regarding response times. The phone tends to respond faster than it did previously. Seems there have been some RAM optimizations. All Animations have been enabled and I've loaded a heavily docked screen with icons. As some of you may not know that the more icons you have, the more sluggish your phone gets as the phone takes time to redraw/recache the icons present on your homescreen. I've experienced no issues whatsoever and the phone tends to swap between apps pretty fluidly. Tested this with contact list load times and a list of over 992 contacts loaded in 7secs. Good job Samsung. Previously it was about 15-17 secs. If you have realized the screen orientation responds much faster now aswell.

Vibration: This part is usually for women ifyouknowwhatImeanunlesstheyhaveotherusesforthisph one, but meh. There seem's to be a slight boost in intensity upon receiving SMS's in silent mode. Don't know if this is a big issue but sometimes I can't seem to feel my phone vibrate in getting SMS's. Now it seems to be slightly "Feelable".

Market: Old School boring one. tl;dr.

RON VS RAM: Once again, My fav showdown based on performance with LW and performance without LW.

With LW- Thou shalt be happy to know that the phone no longer lags with LW. There seems to be a stable and steady RAM usage and under 20 minutes of constant stress test and whipping, the phone has no RON issues. Loaded with widgets and apps and constant ways to slow down the phone, The lag seems bearable but then again, 7 pages worth of icons and constantly switching with LW didn't bring me much pain. Rather the phone handled it like a boss. Me Gusta.

Without LW- Pretty straightforward, There has been no issues so far, For all you TouchWiz fans, I've tested with LW and without LW the pinch gesture to see how far can I take it to lag and the phone swaps between them, slowly due to animation, but still smooth. Me Gusta!

Battery: Battery improvement has been looked into aswell. Apart from the annoying glitch where your battery is being recognized as < 30% after a reflash, The phone was left to a whooping 10% playing music and ofcourse with the Wi-Fi on, took a nice small nap and came back 20mins later to find out the phone was at 8%, Not bad, but generally not the best either.

EDGE/GPRS Battery life: You shall be glad to know that this too has been looked into, The ever so annoying issue on XXKPE where the battery had the tendency to overheat like crazy causing your phone in your pants to cook your crotch, well no longer. Turned off Wi-Fi and left it on 2G/3G from 8% battery and over 10 minutes it dropped to 7%. Overheat still remains but the battery drain isn't as harsh as XXKPE. Me Gustas Tu.

Keyboard: There seems to be less keyboard lag aswell. Stock keyboard is lag free as usual, Swift X Key's latest version has a few minor bugs but on speed typing craze I found no issues that was directly related to the phone.

Video: Video supports MKV format as posted earlier, Need I say more? FLV support is also included, F4V aka HQ FLV is supported aswell. I haven't checked if this was a supported file format earlier.

Camera: Picture's taken in the dark aren't as much of a greyscale oriented as it was previously, There seems to be better illumination now, Video records .29 seconds faster than it originally did. Stock gallery isn't that great but the touch response and pinch sensitivity has been improved at a decent rate. Photo loadup times have been increased aswell.

Overall Verdict: There were a few thing's I was happy and unhappy with this. Once again this version has more improvements than thing's that get me upset, there hasn't been issues regarding shutdown or random hang ups. There is the question though on Google Talk and Skype support if this will however once again HOG SYSTEM RESOURCES. Sorry for the caps as it was necessary. Old Market, No flyover or CRT makes this somewhat a dry release once again, Once again the root being a major issue.

Overall Overall: Worth the flash, But still needs work on SOC support, Wouldn't want to go through the hectic ROOT Exploit method as it's a hassle for some. If you prefer stock then this is the perfect one for you.


Here's a screenshot given by Aaditya2  @XDA.









For Root - go here http://forum.xda-developers.com/show....php?t=1222614

For CWM - go here http://forum.xda-developers.com/show....php?t=1201062

For Deodexing - Go here http://forum.xda-developers.com/show....php?t=1198193

For Theme - go here http://forum.xda-developers.com/show....php?t=1216185

You may join our discussion thread at XDA-Developer to get any other details and info.

Read More

ODIN Guide: Upgrade 2.3.4 Gingerbread XXKP9 Samsung Galaxy SL I9003

 Here's a procedure on how to flash and install the leaked XXKP9 2.3.4 Gingerbread firmware for Samsung Galaxy SL I9003. Note: This is a DEV RELEASE VERSION and not been officially released. But you may still try out of curiosity matter.  I have quoted the best feedback below from those who already tried out and install this said firmware. You may also checked of what's new and known issues about this ROM in our discussion here at XDA.  

For beginners back up all of your important data installed on the device (use any back up tool).
Note: proceed at your risk, we are not liable any issues happens to your phone by applying this procedure.

Firmware Version: I9003XXKP9 Android 2.3.4 Gingerbread
PIT: latona_20110114.pit
Bootloader: APBOOT_I9003XXKP9_CL309731_REV08_eng_mid_ship
PDA: CODE_I9003XXKP9_CL309731_REV08_eng_mid_ship.tar.md5 
MODEM: MODEM_I9003XXKP9_REV_00_CL1027275.tar.md5
CSC: GT-I9003-CSC-MULTI-OXAKP9.tar.md5
http://hotfile.com/dl/122659959/4c8feec/I9003XXKP9.rar.html
if there is a password try: samfirmware.com 

1. Download and extract the XXKP9 2.3.4 Gingerbread
2. Run ODIN3 v1.83.exe
3. Click PIT button then select and load the file: latona_20110114.pit
     Ensure that the Re-partition, Auto Reboot and F-Reset Time are checked.
4. Boot  your Samsung Galaxy I9003 into Download Mode by pressing the Volume down + OK button,  then hold Power button. Then connect the phone to PC. The ID:COM box will show you an indication if the device is already connected or detected on the PC.

5. Hit the "START" Button to begin flashing the PIT file.

6. Once finish flashing the PIT file, on ODIN click the "RESET" button. (Re-Partition checkbox will automatically uncheck.)
7. Now load all the needed binary files on ODIN.

Click BOOTLOADER button and select this file: APBOOT_I9003XXKP7_CL280937_REV08_eng_mid_ship

Click PDA button and select this file:
CODE_I9003XXKP7_CL280937_REV08_eng_mid_ship.tar

Click PHONE button and select this file:
MODEM_I9003XXKP7_REV_00_CL1021949.tar

Click CSC button and select this file:
GT-I9003-CSC-MULTI-OXAKP7.tar

Turn OFF the Samsung Galaxy I9003 or remove the battery and reinsert it back again. Then boot the phone into Download Mode again. (Volume Down+Home+Power button).
Hit "START" button to flash the Bootloader, PDA, Phone and CSC files.
Do not touch anything until it finishes, you will see a word "PASS" on ODIN window when it successfully completes.

Then do a Factory reset procedure once the phone reboots..You may then confirm and check your newly installed firmware through your About Phone Settings.


Here's spacebar2011 from UK overview about this firmware:

Also, please do not come back on here with stuff like "this ROM, too many bugs, some fancy feature does not work and thus its crap". This is still a DEV ROM and it has bugs, that is expected. So do not moan about that. If you want a bug-free build (if that exists on any version of any OS..), flash one of the officially released ROMs and swallow the fact that you're not made for leaked ROMs.

Okay, rant over!

Now the feedback:

- First and foremost; more than 24 hours and no SOD with everything from data to Wi-Fi left on. No SOD in any sleep scenario, manual or timed out.
- Camera, video rec, playback etc. all works fine. No issues at all.
- Call quality is good.
- Kernel Panic appeared while rooting but nothing more than that.
- I do not use any 3rd party camera apps, so can't tell if they cause problems although ShopSavvy barcode scanner works fine.
- Can play 720p videos (seriously, do you really need to play full HD 1080p vids on a 4" screen?)
- I'm not into watching too many videos on my phone anyway, but mp4 and avi files that I do have on my SD played perfectly fine. I've developed the habit of converting videos to mp4 or avi to the phone's resolution before I transfer them to the phone, it saves memory and weeds out any possible playback issues while maintaining good video quality. (I wouldn't watch Transformers on this, would I?)
- Video calling on 3G works.
- Video calling on Skype not yet supported for this device, Galaxy S was added in the last update, so we might have it soon.. (yes, I'm talking about the latest version.. d'oh! )
- Wi-Fi working fine, no disconnections, signal is reasonably strong.
- HSDPA data working fine, there are disconnections sometimes but that could be an operator issue, not sure.
- Music via bluetooth works, doesn't stop when device sleeps.
- People with Market issues; did you do the utter stupid thing by restoring system apps (incl. Market) from previous backup? If yes, then please smack yourself in the face and reflash. If not, then just go to Applications>All>Market>Clear Data. Reboot phone and launch Market.
- Screw the default gallery and use Quick Pic, trust me, you won't look back!
- Do NOT long press power button, it still is a DEV ROM and Kernel Panic will appear. Just select reboot from the pop-up after pressing power button normally.
- Battery life is as good as Froyo if not better. No complaints.
- Phone is very responsive, smooth and more than 150MB free memory with tons of apps installed. Btw, I used Root Uninstaller to freeze annoying Samsung bloat (Daily News & Briefing, Aldiko, Layar etc.)
- Mobile AP works and can be found in Tethering under Wireless and Networks. (That wasn't tough at all!)
- KIES detects device fine (you know I don't care about that horrendous piece of software but yeah..).
- Both SD cards are detected on PC.
- SD read write speeds are impressive on the phone. I got 9.9 write and 20.5 read speeds on Antutu.
SD Tools gave 8.4 and 20.8 respectively which is still pretty impressive!
- Antutu numbers are attached.

Read More

Samsung Galaxy SL I9003 XXKP9 Android 2.3.4 Gingerbread ODIN Stock ROM Firmware Update is here!

After the latest update of 2.3.4 Gingerbread I9003XXKP7 beta version which reportedly has a "sleep mode" bug problem  issues, here comes another  Android 2.3.4 Gingerbread update Stock ROM for Samsung Galaxy SL I9003. We hope this one carry the fixes from the previous leaked beta version (we don't know yet).  This is built for Europe version of Galaxy S SL I9003 only.
Region: Austria, France, Germany, Italy, Netherlands, Switzerland, UK,
Available languages: de, en, es, fr, it, nl, pt, tr,
Note: this information might not be fully correct

Packaged details:
PIT: latona_20110114.pit
Bootloader: APBOOT_I9003XXKP9_CL309731_REV08_eng_mid_ship
PDA: CODE_I9003XXKP9_CL309731_REV08_eng_mid_ship.tar.md5 
MODEM: MODEM_I9003XXKP9_REV_00_CL1027275.tar.md5
CSC: GT-I9003-CSC-MULTI-OXAKP9.tar.md5

The new update can now be available for download at samfirmware.com , they manage to expose the said leaked firmware update. It 's labeled  I9003XXKP9 with a build date of June 21 2011.

Please Note: this is only a leaked Stock ROM release. So, if you are not sure and not familiar with firmwares for your Samsung Galaxy S SL I9003, just wait for it via KIES update.  If you wanted to give a risk and try it out, you can grab a copy on the link below:
http://hotfile.com/dl/122659959/4c8feec/I9003XXKP9.rar.html
if there is a password try: samfirmware.com

We will give it a try on our Galaxy S SL I9003 and then update this post for any improvements, bug fixes, functionality or any problem issues.

Read More

Samsung Galaxy SL I9003 XXKP7 (Android 2.3.4 Gingerbread ODIN Stock ROM) Firmware Update Online!

Yes folks! the Samsung Galaxy SL I9003 Android 2.3.4 Gingerbread I9003XXKP7 is out now and available for download at samfirmware.com.
This update firmware version is labeled  with a build date of  June 12 2011.
We do not know  yet if these said ROM is stable or just a Beta test.

This is for European Version of Samsung Galaxy SL i9003 Android Mobile Phone. 
Region: Austria, Benelux, France, Germany, Hungary, Italy, Spain, UK
Available languages: de, en, es, fr, hu, it, nl, pt(cs, da, el, fi, no, pl, sl, sv, tr), 

If you want to try it out and choose to take the risk, you can grab a copy of this latest stock ROM for Samsung Galaxy SL I9003 on the link below. 
Link: http://goo.gl/IlGmn
password: samfirmware.com 

We've tried flashing the ROM but it seems like there is functionality issues so far, one of these is the   sleep mode problem, music player, ringtone, call history message or missed call. We've revert back again to 2.2 froyo and wait for another stable Gingerbread update. 

Update:  Another 2.3.4 Gingerbread update leaked is available, labeled with I9003 XXKP9.

Read More

All Samsung Galaxy SL I9003 Froyo 2.2 Stock ROM Firmware Packaged Download

 Here's all the list of the Samsung Galaxy S SL Original Stock ROM firmware available for download, You may need this if you want to update or re-flash or re-download the device Stock ROM.

PIT File: latona_20110114
- the Pit file is the same all of the below firmware version, since it is all 2.2 froyo.
ODIN: Odin3 v1.82.exe
- the ODIN version 1.82 will work for Samsung Galaxy SL firmware flashing.

EUROPE - This version is only advisable for all European Countries and English Languages.
United Kingdom, Germany,France, Italy, etc..

I9003XWKB1  - 2.2.1 froyo
Build Date: February  2011

I9003XEKB1  - 2.2.1 froyo
Build Date: February  2011

I9003XXKA9  - 2.2.1 froyo
Build Date: January 2011

I9003XXKA7 - 2.2.1 froyo
Build Date: January 2011

I9003XXKA8  - 2.2.1 froyo
Build Date: January 2011

I9003XXJL9  - 2.2.1 froyo
Build Date: December 2010

ARABIC - for Arabic Countries

I9003JPKD1  -2.2.1 froyo
Build Date: April 1,  2011

ASIA - This version will work for all Asian countries.
like China, Singapore, Thailand, Malaysia, Indonesia, Korea, Taiwan, Philippines etc.

I9003ZCKC1  - 2.2.1 froyo
Build Date: March 8,  2011

I9003ZTKC1  - 2.2.1 froyo
Build Date: March 8,  2011

I9003DXKB2  - 2.2.1 froyo
Build Date: February 15,  2011

I9003ZCKA6  - 2.2.1 froyo
Build Date: January 2011

## Password is samfirmware.com
# Password is samsung-firmwares.com

Read More