S5360DDLA1 India Samsung Galaxy Y S5360 Android 2.3.6 Gingerbread Firmware Upgrade

Users of Samsung Galaxy Y GT-S5360 in India will be getting the Android 2.3.6 Gingerbread update. The new firmware build number S5360DDLA1 is already spotted on Samsung firmware server and will be going officially rolled out anytime now. This is an update from previous build S5360DDKK1. Since this update is still in 2.3.6, just expect  no more major changes might take effect, this update might just add more enhancement, better performance possibly and a stable Gingerbread experience for Galaxy Y.

Firmware info:
PDA: S5360DDLA1
PHONE: S5360DDLA1
CSC: S5360DDLA1
KERNEL: 2.6.35.7 dpi@DELL170#1
Version: Android 2.3.6 Gingerbread
Build: January 2012

The original and unmodified S5360DDLA1 stock ROM is now also available for download. via sammobile Samsung Galaxy Y GT-S5360 Asia firmware page.
GT-S5360_ODD_S5360DDLA1_S5360ODDLA1
Password: samfirmware.com
 
Stock firmware S5360DDLA1 Odin installation: for advance users who prepared Odin instead of  Kies.

Upgrade only: Load each specific file on each designated button slots.
Bootloader: BOOT_S5360DDLA1_REV05.tar.md5
DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5 (Use this one)
PDA: PDA_S5360DDLA1_REV05.tar.md5
Phone: MODEM_S5360DDLA1_REV05.tar.md5
CSC: GT-S5360-MULTI-CSC-ODDLA1.tar.md5
DO NOT check 'Re-Partition ' checkbox'

Full flash: from any unofficial ROMs, fixing previously softbricked and also to those who struggle to revert back to original India firmware because of flashing the wrong firmware version from other region. Just add the pit file unto it. Then load the Default bootloader, PDA, Phone and CSC md5 file.

PIT button: totoro.pit  
"Check the "Re-Partition checkbox"

Check out the full detailed step by step procedure on how to flash Samsung Galaxy Y using Odin.

Read More

Odin Guide on How to Flash and Install stock ROM Firmware on Samsung Galaxy Y S5360

How to use Odin in flashing the stock ROM on Samsung Galaxy Y S5360?

Here's the procedure on how to manually install the stock ROM (firmware) on Samsung Galaxy Y GT-S5360. Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desired. This has been also useful for unbricking purposes for a bricked, reverting back to original stock or if you needed your device warranty back.

This guide is a bit risky for beginners and can only be used by advance users who already had a little bit experience on how to tweak android devices firmware.
Now, this procedure is no joke and should be taken seriously  for it might results to damage your phone if some mistakes might happen. We are talking about firmware flashing here, one false move or any interruption will take your device into serious situation that is not too easy to recover.Your phone is not a toy for us, but it is your personal property, you are the only one who can decide on what to do about it.

 Disclaimer: We shall not be held not responsible if anything happens to your device by following this guide. Proceed at your own risk!

Needed files and tools
Stock ROM - See list of Samsung Galaxy Y stock ROMs (extract it after downloading)
Odin Multi-downloader -
PIT file - Tottoro.pit (Only needed for full flashing)
Driver - You need to install Kies to get the driver of your phone.
USB cable - use the supplied USB cable of your Galaxy Y.
PC or laptop - running on Windows or later OS.
Your Phone - Samsung Galaxy Y GT-S5360

Preparation before Flashing
Back-up all of your important data stored in the phone like contacts, messages and etc. Flashing will wipe and delete all of it.
Ensure that your phone is fully charge or above 50% charge. (If your phone had an auto-shutdown history, and its too old, use a newer or good working battery.
Remove the SIM card and the external memory card. (not necessarily but recommended to avoid any certain issues)
Hard Reset - We often do hard reset before flashing to clean the memory cache of the phone. Master reset code *2767*3855# .

ODIN Flashing Procedures for Samsung S5360 Galaxy Y
1. Run the ODIN Downloader on your PC desktop.
2. Load the firmware binary files on each designated button spaces.

How to Flash with Multiples files with Pit, Bootloader, PDA, Phone and CSC
This is full flashing and useful for unbricking for it has a full packaged with individual file allocations, this type of files we often used to fix a bricked Samsung Android devices. Some firmware updates have like this one and some are came into just a single file packaged.

Click on each button and load the appropiate file unto it.
Pit Button - the tottoro.pit is the default repartition file for Samsung Galaxy Y S5360

Bootloader - look for the file with the letter Boot,
like DefaultCalDataWithBoot_S5360XXXXX_REV05.tar.md5

PDA button - look for the file with the letters PDA on it,
like PDA_S5360XXXXX_REV05.tar.md5

PHONE button- look with the word MODEM file,
like MODEM_S5360XXXXX_REV05.tar.md5

CSC button - associated also with letters CSC or Multi_CSC,
like GT-S5360-MULTI-CSC-OXXXXX.tar.md5

There are three checkboxes on the left side of ODIN, the Re-Partition, Auto Reboot and F.Reset Time.
The Auto Reboot and F.Reset Time are often always checked in flashing while the Re-Partition will only be checked if you want to fix the memory partition of the phone, now if you'll only want to upgrade or downgrade DO NOT CHECK THE REPARTITION.



How to Flash Without Bootloader and PIT file?
Flashing with pit and bootloader file is quite enough risky but a little more safer than without it.
It's the same as the above method just load the PDA, MODEM/phone and CSC file to each designated boxes. The "Repartition" checkbox is not to be check, only the Auto-Reboot and F,Reset Time got the checks



How to Flash with Only Single file?
Some files came only in a single packed like with tar.md5 file extension., and sometimes a 'SS_DL.dll' file also included on it. Others are confused where to put this file. Well, the S5360XXXXX_S5360XXXXX_S5360XXXXX_HOME.tar.md5 goes on to the PDA button section while the 'DLL' file in not to be used, it only be used on some other issues.
Again the "Repartition" check-box is not to be tick, only the Auto-Reboot and F.Reset Time are checked.



Setting up the Samsung Galaxy Y into Download Mode and Connecting to PC.
You need to set the device into download mode in order to let Odin recognize it. To set into download mode
Turn OFF the phone, then hold and press the three buttons Volume Down + Home + Power Key simultaneously, you are then opted into download mode screen use the Volume Up button to proceed. If you'll still not get into download mode, remove the battery a couple of seconds then put it back again and then press the download mode button combination again.



Once the phone displays the Android robot and says "Downloading..." Connect the phone to PC with the supplied USB cable. Odin will automatically recognize it if it's properly connected, the ID:COM mapping will highlight to color yellow and says "added" on the log box.

Start Flashing
Hit the "Start" Button when all are set perfectly to begin flashing.


CAUTION: Avoid touching the phone while the flashing already started, any interruption will result into serious issues like soft-brick or hard-brick.

Let the flashing completes, a progress bar displays until the firmware downloading process finishes. It only takes around 3 to 5 minutes, depends of your PC speed.
When a word "PASS" appears, it means that the flashing is successful. The phone will then reboot and after completely rebooted it is now safe to remove it from computer's connection.


Do a hard reset again by the code *2767*3855#  or in recovery mode hold and press Volume UP+Home+Power key. Navigate to the Wipe Data cache/Factory Reset.
Some other tweaks:
1) To check your  recent firmware info *#1234#
2) CSC configuration - IMEI number check [*#06#]
3) *#272*[IMEInumber]#
4) Choose sales code

Read More

Samsung Galaxy Y S5360 Original Stock ROMs Firmware Packaged

This is a list of available Stock ROMs for Samsung Galaxy Y S5360 Official or original stock ROMs firmware from the first released up to the latest firmware updates. This files is usable to flash update or downgrade the device firmware to its original factory default firmware settings.

"NOTE: This firmwares or ROM's are for Samsung Galaxy Y S360 only. DO NOT EVER attempt to flash it to other device other than the Samsung Galaxy Y S5360. Make sure you always use firmware files which is created for your specific country or network provider, to prevent any problems and avoid any functionality issues.

Disclaimer: Be careful in flashing the device, always proceed with precautionary measures to avoid bricking the phone...  We are not held responsible any cause might happen to your phone by using this files. Proceed at your own risk!.

How to check your Samsung Galaxy Y firmware:
Type this code *#1234# on your phone to know the firmware version of your device.
Then you'll get a firmware details like this.

PDA: S5360XXKI9
PHONE: S5360XXKI9
CSC: S5360XENKI3
version: Android 2.3.5


Europe Firmware - European Version of Samsung Galaxy Y S5360

Europe Regional Firmware Codes:
XA - Austria, France, Germany, Italy, Netherlands, Switzerland, United Kingdom
XB - Denmark, Norway, Sweden
XC - Portugal, Spain
XD - Croatia, Czech, Hungary, Slovakia
XE - Bulgaria, Estonia, Kazakhstan, Latvia, Lithuania, Russia, Ukraine, United States
XF - Bulgaria, Croatia, Romania
XG - among others Germany
XP - UK, France, Italy, Spain, Netherlands, Poland, Portuguese, Turkey
XX - Austria, Belgium, France, Netherlands, Poland, Germany, Hungary, Italy, Spain, United Kingdom
XW - Austria, Belgium, France, Netherlands, Poland, Germany, Hungary, Italy, Spain, United Kingdom

S5360XXKI6

Region: Austria, Belgium, France, Netherlands, Poland, Germany, Hungary, Italy, Spain, United Kingdom
PDA: S5360XXKI6
PHONE: S5360XXKI6
CSC: Multi_S5360OXXKI6
Version: Android 2.3.5 Gingerbread
Date: September 2011
Stock ROM : GT-S5360_OXX_S5360XXKI6

Mirror: http://www.multiupload.com/XY1PKJFY70

Password: sampro.pl

S5360XXKI9

Region: Netherlands - XEN
Product Code: GT-S5360MAAXEN
Firmware details:
PDA: S5360XXKI9
PHONE: S5360XXKI9
CSC: S5360XENKI3
Version: Android 2.3.5 Gingerbread
Date: September 2011
Stock ROM: GT-S5360_XEN_S5360XXKI9

Mirror:http://www.multiupload.com/CZ51WMBB8K

Password: sampro.pl

S5360XXKJ2

Region: Netherlands - VDP
Firmware details:
PDA: S5360XXKJ2
PHONE: S5360XXKJ2
CSC: S5360VDPKJ2
Version: Android 2.3.6 Gingerbread
Date: October 2011
Stock ROM: GT-S5360_VDP_S5360XXKJ2

Mirror:http://www.multiupload.com/ZWT5Y852MQ

Password: sampro.pl

S5360XXKJ3

Region: Netherlands - KPP
Firmware details:
PDA: S5360XXKJ3
PHONE: S5360XXKJ3
CSC: S5360KPPKJ1
Version: Android 2.3.6 Gingerbread
Date: October 2011
Stock ROM: GT-S5360_KPP_S5360XXKJ3

Mirror:http://www.multiupload.com/ASZKKXY3MK

Password: sampro.pl

S5360XXKJ4

Region: Czech Republic - XEZ
PDA: 5360XXKJ4
PHONE: 5360XXKJ4
CSC: S5360OXXKJ4
Version: Android 2.3.6 Gingerbread
Date: October 2011
Stock ROM:GT-S5360_XEZ_S5360XXKJ4

Mirror:http://www.multiupload.com/A6E0278OY3

Password: sampro.pl

S5360XXKJ4

Region: Poland - XEO
Product Code: GT-S5360MAAXEO
Firmware details:
PDA: 5360XXKJ4
PHONE: 5360XXKJ4
CSC: S5360OXXKJ4
Version: Android 2.3.6 Gingerbread
Date: October 2011
Stock ROM: GT-S5360_XEO_S5360XXKJ4
Password: sampro.pl

Czech Republic
Product Code: GT-S5360MAAXEZ
HIDSWVER: S5360XXKJ4/S5360OXXKJ4/S5360XXKJ4/S5360XXKJ4

Netherlands
Product Code: GT-S5360MAAXEN
HIDSWVER: S5360XXKI9/S5360XENKI3/S5360XXKI9/S5360XXKI9

Netherlands
Product Code: GT-S5360MAAVDP
HIDSWVER: S5360XXKJ2/S5360VDPKJ1/S5360XXKJ2/S5360XXKJ2

Netherlands
Product Code: GT-S5360MAAKPP
HIDSWVER: S5360XXKJ3/S5360KPPKJ1/S5360XXKJ3/S5360XXKJ3

Poland
Product Code: GT-S5360MAAXEO
HIDSWVER: S5360XXKJ4/S5360OXXKJ4/S5360XXKJ4/S5360XXKJ4

Network Provider Firmwares

Carrier Branded version of Samsung Galaxy Y S5360

S5360BOKJ1

Carrier: T-Mobile
Region: Netherlands
PDA: S5360BOKJ1
PHONE: S5360BOKI3
CSC: S5360TNLKJ1
Version: Android 2.3.6 Gingerbread
Date: October 2011
Stock ROM: GT-S5360_TNL_S5360BOKJ1

Mirror:http://www.multiupload.com/O9H3UDKTKN

Password: sampro.pl

S5360BOKJ1

Carrier: T-Mobile
Region: Germany
PDA: S5360BOKJ1
Phone: S5360BOKI3
CSC: S5360DTRKJ2
Version: Android 2.3.6 Gingerbread
Date: October 2011
Stock ROM: GT-S5360_DTR_S5360BOKJ1

Asia Firmwares - Asia Pacific, South East Asian version of Samsung Galaxy Y S5360

Asia Regional Firmware Codes
DB - Vietnam
DC - Thailand
DD - India
DX - Indonesia, Malaysia, Philippines, Singapore, Vietnam
DZ - Malaysia, Singapore
ZC - China, Hong Kong
ZH - Hong Kong
ZT - Taiwan

S5360DXKJ3

Region: Indonesia - XSE

PDA: S5360DXKJ3
PHONE: S5360DXKJ1
CSC: S5360OLBKJ2
Version: Android 2.3.6 Gingerbread
Date: October 2011

Stock ROM: GT-S5360_XSE_S5360DXKJ3

Mirror:http://www.multiupload.com/9R2G583WQN

Password: sampro.pl

S5360DXKK4

Region: Philippines - XTE

PDA: S5360DXKK4
PHONE: S5360DXKK2
CSC: S5360OLBKK1
Version: Android 2.3.6 Gingerbread
Date: November 2011

Stock ROM: GT-S5360_XTE_S5360DXKK4

Mirror:http://www.multiupload.com/W5WYSNGW93

Password: sampro.pl

S5360ZCKK2

Region: China - Hong Kong

PDA: S5360ZCKK2
PHONE: S5360ZCKK2
CSC: S5360OZHKK2
Version: Android 2.3.5 Gingerbread
Date: November 2011

Stock ROM: GT-S5360_OZH_S5360ZCKK2

Mirror:http://www.multiupload.com/SCNJ40FS2Z


The stock ROMs above was pulled from Samsung Kies server and was originally uploaded and filed at sampro.pl. So, the credit goes to them.


We will try to keep this list updated from time to time if there are any latest available stock ROMs pulled from official firmware updates releases for Samsung Galaxy Y S5360.

Read More